Snow Blowers


Cub Cadet 528 SWE Snow Thrower

February 21st, 2011 ernie Posted in 28 " Wide Blowers, Cub Cadet No Comments »

The Cub Cadet 528 SWE Snow Thrower comes with a 357 cc engine and powers a 28 Cub Cadet 528 SWE Snow Throwerinch wide clearing width that will make short work of your driveway, parking lot and walk ways when it comes to clearing snow. The intake height is 21 inches and the 12 inch impeller and augers are large enough to deal with most snow conditions. This snow thrower also has 6 forward and 2 revers gears which is pretty common in the market for snow throwers and snow blowers.

A nice feature is the remote 4 way pitch control and chute rotation which allows operators to direct snow in almost any direction and all from the controls on the handle bars.  The tires are 16 inches and provide lots of traction.

Cub Cadet 528 SWE Snow Thrower – Specifications:

  • 357cc, OHV 4-Cycle Cub Cadet® Engine
  • 28″ Clearing Width
  • 21″ Intake Height
  • 12″ impeller diameter
  • 12″ auger diameter
  • 6 Forward / 2 Reverse Speeds
  • 4-Way Pitch Control and Chute Rotation
  • 16″ x 6.5″ X-TRAC™ Tires
  • 5 qt fuel tank
  • 3-Year Limited Residential & 1-Year Commercial Warranty

Engine: This Cub Cadet 528 SWE Snow Thrower has a  357cc, OHV 4-Cycle Cub Cadet® Engine

Transmission: This snow blower has 6 Forward / 2 Reverse Speeds

Warranty: This 3-Year Limited Residential & 1-Year Commercial Warranty

Features:

  • Push Button Electric Start
  • Posi-Steer™ Fingertip Controlled Power Steering
  • In-Dash Headlight
  • Ultra High Molecular Weight COOL BLUE™ Adjustable/Reversible Skid Shoes

Description of the Cub Cadet 528 SWE Snow Thrower

This CC 528 SWE snow trhower also has push button electric start to make it easier for many people to start this machine in cold weather. You also get power steering with this machine with a flip of a switch to change direction. No need to try to manhandle a heavy snow blower, just press the switch. If you blow snow at night, then you will appreciate the in dash headlight to give you lots of light while blowing snow.

Delivery

Most customers will have to arrange for delivery of their new snow blowers. They are far too big to take home in your car, so you will need a trailer, rent a van or arrange for delivery by the store that you are purchasing the snow blower from. There will be a charge for this service, but it will be the easiest way to arrange for your new snow blower to be delivered to your home. Some stores will rent their vans/trucks to you for a very low price for 2 hours for you to take your purchases home. Lowes and Home Depot do this as well as others.

Accessories

Most snow blowers can be purchased with tire chains to provide extra traction in icy situations. In addition, snow shields are also a good idea if you want to protect yourself from windy conditions and snow being blown back at you from the wind.

Safety & Operation

A snow blower is a powerful machine and should be treated with safety in mind. Carefully read all of the safety guidelines in the manual prior to operating the machine for the first time and follow these guidelines to ensure that both you and the machine do not have an accident.

Prior to starting your snowblower the first time each day, perform a quick walk around check of the machine to ensure there are no loose parts and no leaking fluids. Check the engine oil to ensure that it is at the correct level as specified by the manual. Top up if necessary. Fill the fuel tank while the engine is cold and prior to using the machine. If you do spill fuel, wait until it has fully evaporated prior to starting the engine. Never spill fuel on a hot engine to avoid fires and always fill the fuel tank outdoors to avoid any possibility of vapors going into your house.

Finally never point the chute in the direction of people, buildings or cars to avoid any possible damage and accidents. Sometimes chunks of ice can be thrown at high speed from the chute. If they hit something, it can cause a lot of damage.

Never work on your snow blower with the engine running – this seems like an obvious thing but people still do it and are hurt, sometimes badly, every year. Always turn it off before you do any maintenance, add fuel, check the oil, fix the chains on the tires, or clear the augers of snow.

Clearing Snow from the Augers

This is were lots of people are hurt every year. Before you try to clear snow that is plugging the augers, shut the engine off to avoid sudden turning of the augers or the impeller which could cause lots of damage to fingers, hands and arms.

Use Snow Clearing Tool – This is the really important part. You have plugged the augers with snow. You have shut the machine off and now you are trying to clear the snow away. Never place your hands inside the augers to get at the snow. Use a broom handle if you have an old machine, or the snow clearing tool that came with your newer machine to clear the snow. You can also purchase these tools from most stores as an extra if you break yours. Or if you have an older machine which does not have one. This is the safe way to clear snow from around the augers and the impeller.

Sometimes the snow is so compacted, that as you clear it away, it allows the augers to turn as a result of built up tension in the pulley mechanism. Better to have a broom handle stuck in there than your hands!

Most new snow blowers come with a snow clearing tool which you can use for this purpose. Always use this tool and never use your hands. If you have an older machine, an old broom handle will do the trick as well.

Maintenance

Like all snow blowers maintenance is important for your machine to operate at a peak level for many years. Change the engine oil regularly. Check the belts for tightness. Change the spark plug as required. Grease any spots outlined in the manual. If you need to leave the snow blower outside all year round, cover the machine with a proper cover. This will keep it looking new and avoid deterioration of the tires and metal components.

AddThis Social Bookmark Button

MTD Gold Snow Thrower M54LG

December 7th, 2010 ernie Posted in 28 " Wide Blowers, MTD No Comments »

The MTD Gold Snow Thrower M54LG has a 28 inch clearing width and a 21 inch intake height for those high drifts that winter brings. It is powered by a 277cc MTD Gold Snow Thrower M54LGengine winterized engine and comes with 12 inch augers and a 12 inch impeller. This snow thrower is great for most urban situations and comes with lots of features that many people will appreciate.

The heated handles are one feature that will please everyone. If you have been outside blowing snow in freezing temperatures, your fingers often get very cold when you have to hold on to the cold steel handles. With heated handles, you will never need to deal with this issue again. Having cold hands makes it very unpleasant to be outside blowing snow.

This snow thrower comes with 6 forward and 2 reverse speeds, which is pretty standard in the industry. It has an electric starter, however, it does not have clickable steering that some other models have. Clickable steering allows you to change direction by clicking a trigger switch, which can be useful if you do not like to manhandle a snowblower.

MTD Gold Snow Thrower M54LG – Specifications:

  • 277cc PowerMore™ OHV winterized engine runs quieter and cleaner
  • 28” clearing width
  • 6 forward, 2 reverse speeds: select the best place for both you and the snow conditions
  • 12” X-treme augers: each auger flight has its own shear bolts to allow augers to continue working if one goes down
  • 12” impeller and 21” intake height
  • 16″ x 6.5″ X-trac snow tires for maximum traction

Engine: This MTD Gold Snow Thrower M54LG has a 277cc PowerMore™ OHV winterized engine that runs quieter and cleaner

Transmission: This MTD Gold Snow Thrower M54LG comes with 6 forward, 2 reverse speeds. Select the best pace for both you and the snow conditions

Warranty: 3-year limited warranty for true peace of mind

Gold Snow Thrower M54LG Features:

  • Steerable wheel drive turns snow blower left or right with the click of a trigger
  • Electric Start: No need to pull. Manual back-up included
  • NEW 4-way chute control – direct snow up, down, and side-to-side
  • Taller poly chute focuses concentrated blasts of snow – arctic tested: won’t rust, dent, or crack!
  • Heated handle grips keep hands warm
  • Single hand controls: locks in speed leaving one hand free to operate chute
  • In-dash yard light: for improved visibility and safety
  • Poly slide shoes: help prevent driveway marks and scratches
  • Tool-less drift cutters to cut away at deep snowdrifts
  • Space-saving, folding handles for easy storage
  • Automotive-style powder coated paint for a durable, long-lasting finish
  • Extra shear bolts included
  • Assembles in minutes – no tools required
  • Oil pre-filled in the engine – gas it up and you’re ready to go!

Description of the MTD Gold Snow Thrower M54LG

This snow thrower has lots of features as listed above. We like the in-dash yard light. Operators will find this useful if you are blowing snow in poor light conditions in the evening or early morning. Also, the tool-less drift cutters are an advantage especially if you get heavy snow that drifts across your driveway or walkway.

The engine comes pre-filled with oil, however, we recommend that you always check the oil level before starting to make sure that there is sufficient oil in the engine. It can be ready to go in minutes, just unfold the handles, check the oil level, add fuel and you should be ready to go. Read the instruction book first before operating for the first time.

Delivery

Most customers will have to arrange for the delivery of their new snow blowers. They are far too big to take home in your car, so you will need a trailer, rent a van or arrange for delivery by the store that you are purchasing the snow blower from. There will be a charge for this service, but it will be the easiest way to arrange for your new snow blower to be delivered to your home. Some stores will rent their vans/trucks to you for a very low price for 2 hours for you to take your purchases home. Lowes and Home Depot do this as well as others.

Accessories

Most snow blowers can be purchased with tire chains to provide extra traction in icy situations. In addition, snow shields are also a good idea if you want to protect yourself from windy conditions and snow being blown back at you from the wind.

Safety & Operation

This MTD Gold Snow Thrower M54LG is a powerful machine and should be treated with safety in mind. Carefully read all of the safety guidelines in the manual prior to operating the machine for the first time and follow these guidelines to ensure that both you and the machine do not have an accident.

Prior to starting the MTD Gold Snow Thrower M54LG the first time each day, perform a quick walk-around check of the machine to ensure there are no loose parts and no leaking fluids. Check the engine oil to ensure that it is at the correct level as specified by the manual. Top up if necessary. Fill the fuel tank while the engine is cold and prior to using the machine. If you do spill fuel, wait until it has fully evaporated prior to starting the engine. Never spill fuel on a hot engine to avoid fires and always fill the fuel tank outdoors to avoid any possibility of vapors going into your house.

Finally never point the chute in the direction of people, buildings, or cars to avoid any possible damage and accidents. Sometimes chunks of ice can be thrown at high speed from the chute and if they hit something, it can cause a lot of damage.

Maintenance

Like all snow blowers or snow throwers, maintenance is important for your machine to operate at a peak level for many years. Change the engine oil regularly, check the belts for tightness, change the spark plug as required, and grease any spots outlined in the manual. If you need to leave the snow blower outside all year round, cover the machine with a proper cover to keep it looking new and avoid deterioration of the tires and metal components.

AddThis Social Bookmark Button

Yardman 357cc 28inch Electric Start

September 7th, 2010 ernie Posted in 28 " Wide Blowers, Yardman 1 Comment »

Each year the names, specifications and model numbers are changed and updated Yardman 357cc 28inch Electric Startby all of the manufacturers. We have decided to describe the basics of each snow blower in the title to make it easier for readers to review all of the machines. This Yardman 357cc 28inch Electric Start snow blower comes with an electric starter a wide 28-inch cleaning width and a full 21-inch intake height. This snow blower will be suitable for most residential applications where you are clearing snow from your driveway and walkways around your home.

Yardman 357cc 28inch Electric Start – Specifications:

  • 357cc* OHV 4-Cycle Engine
  • 28″ Clearing Width
  • 21″ Intake Height
  • 12″ Impeller
  • 6 forward, 2 reverse
  • 16″ by 4.8″ tires
  • 4 way / 200-degree chute control
  • 4-way pitch control
  • Fuel capacity 5 qt’s

Engine: This machine is a 357cc* OHV 4-Cycle Engine

Transmission: The transmission is 6 forward, 2 reverse

Warranty: This Yard Man 357 CC snow machine has a 2-Year Limited Residential Warranty

Features:

  • Deluxe skid shoes
  • Steel shave plate
  • snow hog tread on tires
  • single in-dash headlight
  • electric start

Description of the Yardman 357cc 28inch Electric Start Snow Blower

The Yardman 357 cc 28-inch snowblower has a stell shave plate to help you scrape snow right down to the pavement, knobby tires to get a good grip while blowing snow, and a headlight for blowing snow at night. Skid shoes make sure that your snowblower slides along smoothly. They can be adjusted to the height that you prefer and replaced if they become worn down.

Delivery

Most customers will have to arrange for the delivery of their new snow blowers. They are far too big to take home in your car. So you will need a trailer, rent a van or arrange for delivery by the store that you are purchasing the snow blower from. There will be a charge for this service.

Accessories

Most snow blowers can be purchased with tire chains to provide extra traction in icy situations. In addition, snow shields are also a good idea. You can protect yourself from windy conditions and snow being blown back at you from the wind. They can be purchased for most snow blowers including the Yardman 357cc 28inch Electric Start.

Online Reviews: We were unable to find any online reviews for the Yardman 357cc 28inch Electric Start Dual Stage Snowblower, however, please leave your comments at the end of this blog if you have used one of these machines.

Safety & Operation

Carefully read all of the safety guidelines in the manual prior to operating the machine for the first time and follow these guidelines to ensure that both you and the machine do not have an accident.

Prior to starting the Yardman 357cc 28inch Electric Start Dual Stage Snowblower the first time each day, perform a quick walk-around check of the machine to ensure there are no loose parts and no leaking fluids. Check the engine oil to ensure that it is at the correct level as specified by the manual. Top up if necessary. Fill the fuel tank while the engine is cold and prior to using the machine. If you do spill fuel, wait until it has fully evaporated prior to starting the engine. Never spill fuel on a hot engine to avoid fires and always fill the fuel tank outdoors to avoid any possibility of vapors going into your house.

Finally never point the chute in the direction of people, buildings, or cars to avoid any possible damage and accidents.

Maintenance

Like all snow blowers or snow throwers, maintenance is important for your machine to operate at a peak level for many years. Change the engine oil regularly, check the belts for tightness, change the spark plug as required, and grease any spots outlined in the manual. If you need to leave the snow blower outside all year round, cover the machine with a proper cover to keep it looking new and avoid deterioration of the tires and metal components.

AddThis Social Bookmark Button

John Deere Snow Thrower 928E

March 28th, 2010 ernie Posted in 28 " Wide Blowers, John Deere 6 Comments »

The John Deere Dual Stage  Snow Thrower 928E is packed with features. The engine is a 4 cycle Briggs and Stratton engine fine tuned for winter and providing John Deere Snow Thrower 928E13.5 pounds gross torque. With a 28 inch clearing width two stage design and steel augers, this snow thrower will meet most consumers needs. There are 6 forward and two reverse speeds and it comes with a 3 quart fuel tank.

Operators can use one hand to steer the John Deere Dual Stage  Snow Thrower 928E and the other to manage the chute direction and rotation. There is a push button 110V electric starter. This is not a battery operated starter. You can also start the engine with the standard recoil pull chord. There is also an aluminum lo-tone muffler for quieter operation and reduced noise. The console includes an electric chute rotation control with a 200 degree turning radius which you can control with one hand and steer with the other. The chute has a large opening for increased snow capacity.

John Deere Snow Thrower 928E – Specifications:

  • 13.50 foot pounds gross torque, 4 cycle engine OHV Briggs and Stratton snow series engine
  • 28 inch clearing width
  • 3 quart fuel tank
  • 16 inch by 4.8 inch x-trac tires
  • 6 forward and 2 revers with friction disk drive

Engine: 13.50 foot pounds gross torque, 4 cycle engine OHV Briggs and Stratton snow series engine

Transmission: 6 forward and 2 revers with friction disk drive

Warranty: 2 year consumer warranty and 90 day commercial warranty

John Deere Snow Thrower 928E Features:

  • Free hand control for easy chute rotation
  • Push button 110V electric start standard
  • Recoil start with large mitten grip
  • Friction disk drive with 6 forward/2 reverse speeds
  • Aluminized Super Lo-Tone muffler for reduced noise
  • Knob style wheel differential system
  • Cast iron gear case
  • Steel auger with serrated flighting
  • Deluxe console and handlebar design
  • Large chute opening for increased snow capacity
  • New electric chute rotation with 200-degree turning radius
  • Remote chute deflector
  • New heated hand grips are standard
  • Heavy duty embossed auger housing
  • Offset halogen headlight for better visibility
  • Heat-treated, reversible skid shoes
  • Fresh Start® fuel cap standard
  • Includes tool box and clear out brush
  • This product is CARB compliant
  • The John Deere Promise is not available on this product

Description of the John Deere Dual Stage  Snow Thrower 928E

This John Deere Dual Stage  Snow Thrower 928E  also comes with heated hand grips which are a big plus if you are blowing snow in sub zero degree weather were no matter what you do , your hands get cold. There is also an offset halogen headlight for additional visibility and safety during nighttime operation. There are heat treated reversible skid shoes which can also be replaced.

The fresh start fuel cap is standard and allows fuel stabilizer to be added to provide fresh fuel at all times. The engine is CARB compliant which means it meets most if not all emission requirements. The John Deere Dual Stage  Snow Thrower 928E does not qualify for the John Deere promise.

At time of preparing this review the John Deere Dual Stage  Snow Thrower 928E was listed at $1299 US. Individual dealers may offer sales prices.

Delivery

At the time of the review there were limited quantities of the John Deere Dual Stage  Snow Thrower 928E in stock. Customers could arrange for in store pickup or also arrange for delivery for an additional charge. If you do plan to pick up your brand new snow thrower, you will need a small trailer that is rated for the  weight of the snow blower. Check with the dealer for weight ratings if you plan to pick up the snow blower and save on the delivery charge.

Accessories

There were no accessories listed on the John Deere web site, however most snow throwers have snow cabs, snow covers and tire chains as options for customers to consider. If you want to be protected from the wind and the blowing snow you may want to consider a snow cab which will protect you on 3 sides and make snow blowing and clearing a much more comfortable job.

Operators who must store the John Deere Dual Stage  Snow Thrower 928E outside exposed to the elements should consider the snow cover. It protects the snow thrower from the elements and UV radiation preserving the paint and the machine for a longer period than if you leave it exposed. Use the snow cover all year round if you must store your snow thrower outside.

Tire chains also will help if you have icy conditions and want to avoid slipping and sliding around while blowing snow.

Online Reviews: There were no online reviews for the John Deere Dual Stage  Snow Thrower 928E. If you would like to add your comments, please feel free to do so to help out other consumers.

Safety & Operation

The John Deere Dual Stage  Snow Thrower 928E is an excellent machine to use and when operated safely and properly will provide you with many years of snow blowing operation.

Review the manual prior to operating the snow thrower for the first time. Review all safety guidelines and operating guidelines. Perform a circle check each time prior to operating the snow thrower the first time each day. Check the level of oil in the engine and top up if needed. Most of the time engine oil will not be needed, however it is a good habit to get into with any engine. You can also check the age of the oil be assessing how dirty the oil is. This a good gauge of when you need to change the oil.

Fill up the fuel tank so that you do not run out while blowing snow. Only fill the fuel tank when the engine is cold to avoid any possibility of fire and if you spill fuel wait until it has evaporated before starting the engine.

Maintenance

Oil changes and lubrication of the auger shaft are  the main part of the maintenance tasks for modern snow blowers. Check the manual for all recommended maintenance procedures and timing. If you do not use your John Deere Dual Stage  Snow Thrower 928E very often, as a minimum change the oil in the engine at least once per year.

 

AddThis Social Bookmark Button

MTDPRO Snow Thrower H64FG

February 28th, 2010 ernie Posted in 28 " Wide Blowers, MTD No Comments »

The MTDPRO Snow Thrower H64FG is ideal for one-car and two-car wide driveways. Small enough to store in most garages, yet powerful enough to handle the snow in most driveways, this snow blower is perfect for suburbia and clearing snow. With an electric start, there is no need to pull your shoulder out while trying to start this snow thrower.

MTDPRO Snow Thrower H64FG

Operators can steer the snow blower with one hand while adjusting the direction of the chute with the other hand.

Whether you pick up this snow blower yourself or have it delivered it is tested and ready to go. All you need to do is check the already installed engine oil level, add fuel to the fuel tank and you are ready to go.  Set the speed of the MTDPRO Snow Thrower model  H64FG to match both your preferred walking speed as well as the depth of snow you are trying to clear. Heavy wet snow may require a slower speed to allow the snow thrower to throw the snow sufficiently without becoming bogged down in wet snow.

Drift cutters already installed will help to cut through drifts higher than the 21-inch intake height. Most people let the snow blower do the work, preferring to steer with one hand and use the forward and reverse gears to move the machine to any desired location.

MTDPRO Snow Thrower H64FG – Specifications:

  • 227cc PowerMore OHV engine
  • 28-inch clearing width
  • 6 forward, 2 reverse gears
  • 12-inch serrated augers
  • 12-inch impeller
  • 21-inch intake
  • 16-inch by 6.5-inch snow tires

Engine: 227cc PowerMore OHV winterized engine

Transmission: 6 forward, 2 reverse gears to match snow conditions

Warranty: 4-year limited warranty

MTDPRO Snow Thrower H64FGFeatures:

  • Electric start with manual backup
  • Single-hand controls allow one hand for steering and one for operating the chute controls
  • Tool-less drift cutters
  • In-dash yard light for nighttime visibility
  • Heavy-duty slide shoes
  • 5-inch polymer chute
  • Assembles in minutes
  • Oil pre-filled in the engine

Description of the MTDPRO Snow Thrower H64FG

The in-dash yard light is both a tool to light your way at night while you are clearing the snow from your driveway and at the same time it is a safety light to alert others that you are nearby. Cars will be able to see you easily at night.

The heavy-duty slide shoes protect the housing of the snow thrower. They can be adjusted to adjust the scraper height of the snow you are clearing from your driveway. The polymer chute will not crack or rust and will allow you to point the snow in any direction.

Delivery:

The MTDPRO Snow Thrower H64FG can be purchased at The Home Depot and also at Home Hardware stores across Canada. Customers can visit the local website of these companies to find the nearest location to you. Arrangements can be made for delivery, self-delivery using Home Depot rented vans or self-pickup.

Accessories

No accessories were listed for this snow blower on the MTDPRO website.

Safety & Operation

Before you start the MTDPRO Snow Thrower model  H64FG for the first time, read the manual and follow all initial starting checks as well as safety procedures. Confirm that there is sufficient oil in the engine and also fill the fuel tank for the first time with fresh fuel.

Never point the chute in the direction of people, cars, or buildings while operating the MTDPRO Snow Thrower model  H64FG. Ice pellets and stones can be thrown from the chute at high rates of speed causing damage to anything in their way.

Get into the habit before you start the MTDPRO Snow Thrower model  H64FG for the first time each day by checking the engine oil and the fuel level. Top up as required. Also, complete a check of the snow thrower for any areas that need adjustment or repair. Make sure there is no debris or ice in the auger or impeller area.

Never try to clear debris from the auger or the impeller while the engine is running. Always shut the engine off before attempting to clear ice and snow from this area.

When you are finished for the day, clean all snow and ice off the housing and from the auger and impeller area. This will prolong the life of your snow thrower for many years by protecting the housing from corrosion.

Maintenance

Again check the manual for all recommended maintenance procedures and timing. Change the oil as needed and recommended in the manual. As a minimum change the oil once per year to prolong the life of your engine. Repair all loose and broken items immediately to avoid further damage. Replace all shear bolts as soon as they break.

 

 

Save

AddThis Social Bookmark Button

John Deere 827E Snowthrowers

January 15th, 2010 ernie Posted in 28 " Wide Blowers, John Deere No Comments »

John Deere currently has six snow throwers listed in their product line up, including one single stage, one compact, three dual stage and one professional level snow thrower. Depending on your needs, these John Deere Snowthrowers can handle everything from light snow on a walkway to major snow drifts on long driveways. We are reviewing the John Deere 827E Snowthrowers on this particular blog. Please add any comments about your John Deere Snowthrower in the comments section

John Deere 827E SnowthrowersAt $1099 US, this snow blower from John Deere can be bought online or in a dealer show room if you can find them. Customers should expect delivery in 3 to 7 days if ordered online. With a 27 inch cleaning width, this snow blower is ideal for most mid size driveways without being too big for storage. The 4 cycle Briggs & Stratton engine develops 11.5 foot pounds of torque , more than enough for all of the toughest snow conditions you can throw at it. We will summarize the features of this John Deere 827E Snowthrowers two stage in the next section. The warranty is 2 years for consumers and 90 days for commercial applications!

This snow thrower is not covered by the John Deere promise. The John Deere promise allows unhappy customers to return their purchase within 30 days to receive a full refund or exchange for another machine.

John Deere 827E Snowthrowers – Specifications

  • 27 inch cleaning width
  • Push button 110 V electric start
  • Recoil start for backup
  • 3 quart fuel tank
  • 13 inch  by  5 inch X-trac tires

Engine:

4 Cycle Briggs & Stratton engine, 11.5 ft-lbs of torque

Transmission:

Friction disk drive with 6 forward and 2 reverse

Warranty:

The warranty is 2 years for consumers and 90 days for commercial applications!

John Deere 827E Snowthrowers Features:

  • Free hand control for easy chute rotation
  • Aluminized Lo-Tone muffler for reduced noise
  • Quick pull knob style wheel differential system
  • Aluminum gear case
  • Steel Auger with notched flighting
  • Remote chute rotation with 190 degree turning radius
  • Remote chute deflector
  • Offset halogen head light for better visibility
  • Heat treated reversible skid shoes
  • Includes tool box and clear out brush
  • This product is CARB compliant

Description of the John Deere 827E Snowthrowers

The 827E Dual stage John Deere Snowthrower is a dual stage snow blower, meaning that it has an auger to grind up the snow and bring it forward into the second stage impeller. It is the impeller that actually blows the snow out the chute away from your snow clearing area.

There are a number of features on the 827E Dual stage John Deere Snowthrower which make this snow blower easy to use. Features such as single hand control while you re-direct the snow chute, electric starter, headlight,  tool box and clear out brush are just a few of the features that make this snow blower a pleasure to use.

Delivery

Delivery is usually 3 to seven days if ordered online. Consumers who purchase in store models, will need to negotiate delivery dates as well as delivery charges for the 827E Dual stage John Deere Snowthrower, however if you can pick up this snow blower chances are you will save on delivery costs as well as timing of the delivery.

Accessories

There were no accessories listed, however some consumers may wish to have tire chains for their 827E Dual stage John Deere Snowthrower. These can be purchased from the dealer in most cases.

Online Reviews

We could not find any specific online reviews for this product.

Safety & Maintenance

Consumers should check for any product recalls on the John Deere web site on a regular basis.  Keep loose clothing away from moving parts and even better, tuck all scarf’s, shirts, coat sleeves etc away so there is no danger from clothing being caught in moving belts and augers.

Before operating the 827E Dual stage John Deere Snowthrower always perform an inspection and check that there are no loose or warn out parts. Also check for leaking fluids, check the oil level and ensure there is sufficient gasoline for the task at hand. Follow inspection guidelines listed in the manual and keep all safety devices in place.

Children should be kept away from operating 827E Dual stage John Deere Snowthrowers to avoid any possibility of injury. Never point the snow thrower chute in the direction of another person, house or car to avoid injury and damage.

If the auger or snow chute becomes jammed, always shut the engine off before attempting to remove debris, ice and snow. When doing any maintenance on the 827E Dual stage John Deere Snowthrower again shut the engine off before removing any guards or working on the snow blower to avoid injury from accidents.

Follow The Engine Oil Regularly

Follow standard recommendations for oil changes and lubrication as pointed out in the manual. At minimum change the oil once a year. Change it more often if heavy use of the snow blower becomes common place.

Consumers should always disconnect the battery ground cable to avoid accidental starting of the engine while maintenance work is underway.

After every use of the 827E Dual stage John Deere Snowthrower remove all snow and ice and store your snow blower in a clean dry location. Proper care of the 827E Dual stage John Deere Snowthrower will ensure many years of service.

Save

AddThis Social Bookmark Button


?>


Web Content Development