Snow Blowers


Cub Cadet 524WE Snow Thrower

The Cub Cadet 524WE Snow Thrower has 24 inches of clearing width which is suitable for pretty much all urban situations. If you have a really long Cub Cadet 524WE Snow Throwerdriveway or a large area to clear you might consider a snow blower with a wider clearing width, if time is an issue for you.

This snow blower comes with the standard 6 forward and 2 reverse gears that all snow blowers of this type come with. It also has a 208 cc engine and is a 4 cycle engine. One of the features that many snow throwers come with these days is the Posi Steer system. Unfortunately this snow blower does not come with this feature. Without this system, it is a bit more difficult to control the direction of the machine and make adjustments in direction as you encounter rutted or difficult areas of snow to clear.

Cub Cadet 524WE Snow Thrower – Specifications:

  • 208cc Cub Cadet® OHV 4-Cycle Engine
  • 24″ Clearing Width
  • 21″ Clearing Height
  • 6 Forward / 2 Reverse Speeds
  • 4-Way Pitch Control & Chute Rotation
  • 15″ x 5″ X-TRAC™ Tires
  • 3-Year Limited Residential & 1-Year Limited Commercial Warranty

Engine: This Cub Cadet 524WE Snow Thrower comes with a 208cc Cub Cadet® OHV 4-Cycle Engine

Transmission: This snow blower has the standard 6 Forward / 2 Reverse Speeds

Warranty: This Cub Cadet 524WE Snow Thrower comes with a 3-Year Limited Residential & 1-Year Limited Commercial Warranty

Features:

  • In-Dash Headlight
  • COOL BLUE™ Rust-Resistant, Non-Marking, Reversible Skid Shoes
  • All-Wheel / Positive Traction Drive System

Description of the Cub Cadet 524WE Snow Thrower

This

Delivery

Most customers will have to arrange for delivery of their new snow blowers. They are far too big to take home in your car. You will need a trailer, rent a van or arrange for delivery by the store. There will be a charge for this service. But it will be the easiest way to arrange for your new snow blower to be delivered to your home. Some stores will rent their vans/trucks to you for a very low price for 2 hours. This is more than enough time for you to take your purchases home. Lowes and Home Depot do this as well as others.

Accessories

Most snow blowers can be purchased with tire chains to provide extra traction in icy situations. In addition, snow shields are also a good idea. They protect you from windy conditions and snow being blown back at you from the wind.

Safety & Operation

A snow blower is a powerful machine and should be treated with safety in mind. Carefully read all of the safety guidelines in the manual prior to operating the machine for the first time. Follow these guidelines to ensure that both you and the machine do not have an accident.

Prior to starting your snowblower the first time each day, perform a quick walk around check of the machine to ensure there are no loose parts and no leaking fluids. Check the engine oil to ensure that it is at the correct level as specified by the manual. Top up if necessary. Fill the fuel tank while the engine is cold and prior to using the machine. If you do spill fuel, wait until it has fully evaporated prior to starting the engine. Never spill fuel on a hot engine to avoid fires and always fill the fuel tank outdoors to avoid any possibility of vapors going into your house.

Finally never point the chute in the direction of people, buildings or cars to avoid any possible damage and accidents. Sometimes chunks of ice can be thrown at high speed from the chute and if they hit something, it can cause a lot of damage.

Never work on your snow blower with the engine running – this seems like an obvious thing but people still do it and are hurt, sometimes badly, every year. Always turn it off before you do any maintenance, add fuel, check the oil, fix the chains on the tires, or clear the augers of snow.

Clearing Snow from the Augers

This is were lots of people are hurt every year. Before you try to clear snow that is plugging the augers, shut the engine off to avoid sudden turning of the augers or the impeller which could cause lots of damage to fingers, hands and arms.

Use Snow Clearing Tool – This is the really important part. You have plugged the augers with snow, you have shut the machine off and now you are trying to clear the snow away. Never place your hands inside the augers to get at the snow. Use a broom handle if you have an old machine, or the snow clearing tool that came with your newer machine to clear the snow. You can also purchase these tools from most stores as an extra if you break yours or if you have an older machine which does not have one. This is the safe way to clear snow from around the augers and the impeller.

Sometimes the snow is so compacted, that as you clear it away, it allows the augers to turn as a result of built up tension in the pulley mechanism. Better to have a broom handle stuck in there than your hands!

Most new snow blowers come with a snow clearing tool which you can use for this purpose. Always use this tool and never use your hands. If you have an older machine, an old broom handle will do the trick as well.

Maintenance

Like all snow blowers or snow throwers, maintenance is important for your machine to operate at a peak level for many years. Change the engine oil regularly, check the belts for tightness, change the spark plug as required and grease any spots outlined in the manual. If you need to leave the snow blower outside all year round, cover the machine with a proper cover to keep it looking new and avoid deterioration of the tires and metal components.

 

 

You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

AddThis Social Bookmark Button

Leave a Reply

?>


Web Content Development