Snow Blowers

The CRAFTSMAN 305cc, 30” Dual Stage Snowblower is perfect for most urban consumers looking for a snow blower that has sufficient power to deal with most driveway snow conditions, yet is small enough to fit with everything else that is in your garage. With a 30 inch clearing width, consumers can clear their driveways and sidewalks in no time at all and blow the snow easily onto the front lawn or into the snow bank. The 305 cc engine is winter ready and has lots of power for the 30 inch wide, 12 inch steel saw tooth auger and 12 inch impeller.

As with most snow throwers of this size the CRAFTSMAN 305cc, 30” Dual Stage Snowblower is a dual stage blower which mean it uses an auger to draw the snow in and an impeller to actually then blow the snow out the chute.

An electric starter, a steel rotation chute with crank complete the features on this snow blower machine.

CRAFTSMAN 305cc – Specifications:

• 30” clearing width
• 305cc Briggs & Stratton, Snow Series engine
• 13.5 ft lbs torque
• 12” steel saw tooth auger, 12” diameter impeller
• 16” x 4” tires, wheel lock

Engine: 305cc Briggs & Stratton, Snow Series engine

Transmission: Dual stage operation is designed for quick, easy removal of large amount of snow.

Warranty: 2 year warranty

Features:

• Dual stage operation is designed for quick, easy removal of large amount of snow.
• Electric starter
• Steel rotation chute
• Crank chute

Description of the CRAFTSMAN 305cc, 30” Dual Stage Snowblower

This snow blower is really ideal for the average consumer. With enough power and snow throwing capacity for most urban driveways , yet small enough to easily store in a corner of the garage, it will be a handy tool in the middle of the winter.

Add a snow a snow shield if you are concerned about strong winds or blowing snow while you are clearing your driveway. Although this snow blower does not come with tire chains, the knobby tires will handle most situations with no problems. You might need chains for sloping driveways that ice over during the winter.

This Craftsman snow blower can be started using the traditional pull rope to start it or you can plug in the starter and start the engine with the push of a button. Either way a well tuned engine will start on the first crank of the engine.

The chute can be rotated 180 degrees with the use of hand crank. It is a bit difficult, but you can steer and crank at the same time. Depress both handles on the hand bar and then using one hand to hold the controls in place, crank the chute in the direction desired.

More considerations

Delivery: Delivery of the CRAFTSMAN 305cc, 30” Dual Stage Snowblower can be arranged through the dealer that you purchase the machine from. There will be a delivery charge, however this is probably the most economical method unless you have access to a van or a small trailer that you can transport the snow blower on.

Accessories: Most snow blowers can add a wind shield or snow shield to them to protect you from three sides from the wind and snow. If you live in a climate with lots of wind and blowing snow this accessory is defiantly something to consider.

Online Reviews: We were unable to find any online reviews for the CRAFTSMAN 305cc, 30” Dual Stage Snowblower, however please leave your comments at the end of this blog if you have used one of these machines.

Safety & Operation

This craftsman snow blower is a powerful machine and should be treated with safety in mind. Carefully read all of the safety guidelines in the manual prior to operating the machine for the first time. Follow these guidelines to ensure that both you and the machine do not have an accident.

Prior to starting the CRAFTSMAN 305cc, 30” Dual Stage Snowblower the first time each day, perform a quick walk around check of the machine to ensure there are no loose parts and no leaking fluids. Check the engine oil to ensure that it is at the correct level as specified by the manual. Top up if necessary. Fill the fuel tank while the engine is cold and prior to using the machine. If you do spill fuel, wait until it has fully evaporated prior to starting the engine. Never spill fuel on a hot engine to avoid fires. Always fill the fuel tank outdoors to avoid any possibility of vapors going into your house.

Finally never point the chute in the direction of people, buildings or cars to avoid any possible damage and accidents. Sometimes chunks of ice can be thrown at high speed from the chute and if they hit something, it can cause a lot of damage.

Maintenance

Like all snow blowers or snow throwers, maintenance is important for your machine to operate at a peak level. Change the engine oil regularly, check the belts for tightness, and change the spark plug as required. Grease any spots outlined in the manual. If you need to leave the snow blower outside all year round, cover the machine with a proper cover. Keep it looking new and avoid deterioration of the tires and metal components.

For more posts about Craftsman Snow blowers, click here.

The Craftsman 342 cc 30″ dual stage Snow blower is a feature rich snow machine that makes clearing any driveway a breeze. The combination of a powerful engine, an automatic transmission and easy controls makes this machine one of the more popular snow blowers. This is a dual stage machine with both an auger to cut the snow and an impeller to blow the snow in the direction you desire.

The impeller is 12 inches and the augers are the saw tooth variety and also 12 inches in diameter.

This snow blower comes equipped with an automatic drive which allows you to vary the speed without stopping. It also has finger controls that allow you to steer with the touch of a finger and to operate with one hand, while using the other to adjust the chute to blow snow in the direction that you desire. The tires are 16  inch by 6.5 inches.

Craftsman 342 cc – Specifications:

30” clearing width

342cc Briggs & Stratton, Snow Series Platinum engine, 16.5 ft lbs torque. MRS spark plug for a surefire spark every time.

12”” steel sawtooth auger, 12”” diameter impeller

16” x 6.5” tires, wheel lock

Engine: 342cc Briggs & Stratton, Snow Series Platinum engine, 16.5 ft lbs torque. MRS spark plug for a surefire spark every time.

Transmission: Automatic drive designed for quick removal of large amounts of snow.

Warranty: 2 year warranty

Features:

Dual stage operation is designed for quick, easy removal of large amount of snow

Electric starter, throttle control, gas gauge

Yard lights for early morning & nighttime. Heated handle grips help keep your hands warm in cold weather.

Drift cutters

Steel remote chute. Remote chute deflection control allows operator to adjust the angle of the chute deflector without having to stop the unit.

Power steering allows for easy maneuverability to handle obstacles. Single hand control allows you to control unit from either side by using one handle, enabling you to operate the chute with one single action & without having to stop.

Automatic drive designed for quick removal of large amounts of snow. Automatic drive allows you to vary speed without stopping. Able to handle all snow conditions

Description of the Craftsman 342 cc 30″ dual stage Snowblower

This particular Craftsman snow blower comes equipped with yard lights to assist in illuminating the area you are clearing. In addition there is an electric starter that can be used to help start the engine instead of having to use the pull chord.

The drift cutters are also useful in situations were there is deep snow caused by drifts across your driveway. They help to cut the snow and caused the higher snow drifts to tumble down in front of the auger.

In addition to being able to guide the snow thrower with one hand the operator can manage the chute and the snow deflector to change directions while operating the snow blower. This flexibility makes it easy to do a quick job of any area that needs to be clear were you want to avoid a lot of obstacles.

Delivery

The 342 cc dual stage snow blower can be picked up or it can be delivered to your home for an additional price. Consumers with access to a van or small trailer can save themselves the delivery fee by making arrangements for pickup.

Accessories

Although not mentioned, most snow blowers can accommodate chains for the tires to provide better traction on icy conditions and also snow and wind guards to protect the operator from blowing snow during windy days.

Online Reviews: We were unable to find any online reviews for the Craftsman 342 cc 30″ dual stage Snow blower, however please leave your comments at the end of this blog if you have used one of these machines.

Safety & Operation

This craftsman snow blower is a powerful machine and should be treated with safety in mind. Carefully read all of the safety guidelines in the manual prior to operating the machine for the first time and follow these guidelines to ensure that both you and the machine do not have an accident.

Prior to starting the Craftsman 342 cc 30″ dual stage Snow blower  the first time each day, perform a quick walk around check of the machine to ensure there are no loose parts and no leaking fluids. Check the engine oil to ensure that it is at the correct level as specified by the manual. Top up if necessary. Fill the fuel tank while the engine is cold and prior to using the machine. If you do spill fuel, wait until it has fully evaporated prior to starting the engine. Never spill fuel on a hot engine to avoid fires and always fill the fuel tank outdoors to avoid any possibility of vapors going into your house.

Finally never point the chute in the direction of people, buildings or cars to avoid any possible damage and accidents. Sometimes chunks of ice can be thrown at high speed from the chute. If they hit something, it can cause a lot of damage.

Maintenance

Maintenance is important for your machine to operate at peak level for many years. Change the engine oil regularly. Check the belts for tightness. Change the spark plug as required and grease any spots outlined in the manual. If you need to leave the snow blower outside all year round, cover the machine. Use a proper cover to keep it looking new. This will help avoid deterioration of the tires and metal components.

For more posts about Craftsman snow blowers, click here.

The Craftsman 208cc 24inch Dual Stage Snowblower has a powerful 208 cc PowerMore OHV engine to provide that extra power you need to go through the deepest drifts of snow and ice. Twelve inch augers with a 12 inch impeller provides a dual stage snow clearing with lots of snow clearing capability and the 24 inch wide clearing width will make short work of most driveways in urban American and Canada.

Operators can control the snow blower with one hand from either while at the same time managing the direction of the chute so that snow can be thrown in what ever direction is needed to avoid hitting buildings, windows or cars. The arctic polymer chute will not crack and will not rust and will withstand the rigor of dealing with snow an ice. Never point the chute in the direction of another person to avoid any possibility of them being hit with ice chips.

Craftsman 208cc 24inch Dual Stage Snowblower – Specifications:

• 24” clearing width
• 208cc PowerMore™ OHV engine
• 12” steel X-treme auger, 12” diameter impeller
• 15” x 5” tires

Engine: 208cc Briggs & Stratton, Snow Series engine

Transmission: Dual stage operation is designed for quick, easy removal of a large amount of snow.

Warranty: 2 year warranty

Features:

• Dual stage operation is designed for quick, easy removal of a large amount of snow.
• Electric starter
• Arctic Polymer rotation chute
• Crank chute
• Single hand control allows you to control unit from either side by using one handle, enabling you to operate the chute with one single action & without having to stop.

Description of the Craftsman 208cc 24inch Dual Stage Snowblower

This snow blower comes with a crank to turn the chute in a 180 degree direction. There is also an electric starter to start the engine.

The 15 inch tires provide lots of traction even in icy conditions. Add optional chains if you have to deal with lots of ice. Consumers can also purchase an optional cover if they need to store their snow blower outside in the elements.

At the time of preparing this post, Craftsman had added a screen for customers to leave comments and review ratings. This model had two very positive reviews extolling the virtues of this snow blower.

Delivery: Delivery of the Craftsman 208cc 24inch Dual Stage Snowblower can be arranged through the dealer that you purchase the machine from. There will be a delivery charge, however this is probably the most economical method unless you have access to a van or a small trailer that you can transport the snow blower on.

Accessories: Most snow blowers can add a wind shield or snow shield to them to protect you from three sides from the wind and snow. If you live in a climate with lots of wind and blowing snow this accessory is defiantly something to consider.

Online Reviews: We were unable to find any online reviews for the Craftsman 208cc 24inch Dual Stage Snowblower, however please leave your comments at the end of this blog if you have used one of these machines.

Safety & Operation

This craftsman snow blower is a powerful machine and should be treated with safety in mind. Carefully read all of the safety guidelines in the manual prior to operating the machine for the first time. Follow these guidelines to ensure that both you and the machine do not have an accident.

Prior to starting the Craftsman 208cc 24inch Dual Stage Snowblower  the first time each day, perform a quick walk around check of the machine. Ensure there are no loose parts and no leaking fluids. Check the engine oil to ensure that it is at the correct level as specified by the manual. Top up if necessary. Fill the fuel tank while the engine is cold and prior to using the machine. If you do spill fuel, wait until it has fully evaporated prior to starting the engine. Never spill fuel on a hot engine to avoid fires. Always fill the fuel tank outdoors to avoid any possibility of vapors going into your house.

Finally never point the chute in the direction of people, buildings or cars to avoid any possible damage and accidents. Sometimes chunks of ice can be thrown at high speed from the chute and if they hit something, it can cause a lot of damage.

Maintenance

Like all snow blowers or snow throwers, maintenance is important for your machine to operate at a peak level for many years. Change the engine oil regularly. Check the belts for tightness. Change the spark plug as required. Grease any spots outlined in the manual. If you need to leave the snow blower outside all year round, cover the machine with a proper cover. The cover will help to keep it looking new and avoid deterioration of the tires and metal components.

For more posts about Craftsman snow blowers, click here.

The Craftsman 205cc 24inch Dual Stage Snowblower has a large 24 inch clearing width with 10 inch steel augers with saw tooth teeth to break down the hardest snow. the 9 inch impeller combined with the 205 cc engine made by Briggs and Stratton completes this powerful combination generating 9 foot pounds of torque.

This snow blower is ideal for most consumers who just need to clear their driveways of snow and get on the road first thing in the morning. It is large enough to make quick work of most snow conditions, yet small enough to fit in the garage along side the car.

The combination of saw tooth auger and impeller makes this dual stage snow blower an affordable powerful machine. Although it does not have some of the features that large more expensive machines have, it is price economically and is affordable for many urban consumers.

Craftsman 205cc 24inch Dual Stage Snowblower – Specifications:

• 24” clearing width
• 205cc Briggs & Stratton, Snow Series engine
• 9 ft lbs torque
• 10” steel sawtooth auger, 9” diameter impellar
• 13” x 5” tires, wheel lock

Engine: 205cc Briggs & Stratton, Snow Series engine

Transmission: Dual stage operation is designed for quick, easy removal of large amount of snow.

Warranty: 2 year warranty

Features:

• Dual stage operation is designed for quick, easy removal of large amount of snow.
• Electric starter
• Steel rotation chute
• Crank chute

Description of the Craftsman 205cc 24inch Dual Stage Snowblower

The steel rotation chute can be hand cranked in a full 180 degree direction to allow you to blow snow in just about any direction. The Craftsman 205cc 24inch Dual Stage Snowblower also comes with an electric starter which makes starting this engine easy on cold days. There is also a backup pull chord to start the engine.

It also comes with a 2 year warranty. Craftsman has one of the best reputations in the business. Sears has started allowing customer feedback on its site and so far this machine has one very positive review with a 4 out of 5 rating.

Although it is a bit difficult, operators can hold both engagement controls in place for forward motion and snow throwing with one hand and rotate the chute by cranking the chute around at the same time.

More Issues

Delivery: Delivery of the Craftsman 205cc 24inch Dual Stage Snowblower can be arranged through the dealer that you purchase the machine from. There will be a delivery charge, however this is probably the most economical method unless you have access to a van or a small trailer that you can transport the snow blower on.

Accessories: Most snow blowers can add a wind shield or snow shield to them to protect you from three sides from the wind and snow. If you live in a climate with lots of wind and blowing snow this accessory is defiantly something to consider.

Online Reviews: We were unable to find any online reviews for the Craftsman 205cc 24inch Dual Stage Snowblower, however please leave your comments at the end of this blog if you have used one of these machines.

Safety & Operation

This craftsman snow blower is a powerful machine and should be treated with safety in mind. Carefully read all of the safety guidelines in the manual prior to operating the machine for the first time. Follow these guidelines to ensure that both you and the machine do not have an accident.

Prior to starting the Craftsman 205cc 24inch Dual Stage Snowblower. Perform a quick walk around check of the machine to ensure there are no loose parts and no leaking fluids. Check the engine oil to ensure that it is at the correct level as specified by the manual. Top up if necessary. Fill the fuel tank while the engine is cold and prior to using the machine. If you do spill fuel, wait until it has fully evaporated prior to starting the engine. Never spill fuel on a hot engine to avoid fires and always fill the fuel tank outdoors to avoid any possibility of vapors going into your house.

Finally never point the chute in the direction of people, buildings or cars to avoid any possible damage and accidents. Sometimes chunks of ice can be thrown at high speed from the chute. If they hit something, it can cause a lot of damage.

Maintenance

Like all snow blowers or snow throwers, maintenance is important for your machine to operate at a peak level. Change the engine oil regularly, check the belts for tightness, and change the spark plug as required. Grease any spots outlined in the manual. If you need to leave the snow blower outside all year round, cover the machine with a proper cover. Keep it looking new and avoid deterioration of the tires and metal components.

For more information about other Craftsman snow blower models, click here.

The Craftsman 179cc 22inch Dual Stage Snowblower comes with a 179 cc PowerMore OHV engine providing lots of power for the dual stage 22 inch clearing width. This snow blower is a low end snow blower both in terms of features as well as price and will meet all of the needs of most suburban residents who want to clear their driveways and possibly the sidewalk in front of their homes.

If you have larger areas or get lots of snow , you may want to consider a larger machine, however this snow blower will more than meet your needs for the majority of consumers.

The 9 inch steel serrated auger cuts into the snow and pulverizes it before pushing it into the impellar which throws the snow out the polymer chute. Consumers can also use the electric starter to start the engine in cold conditions or if you just do not have the strength to pull the back up starter chord.

Craftsman 179cc 22inch Dual Stage Snowblower – Specifications:

• 22” clearing width
• 179cc PowerMore™ OHV engine
• 9” steel serrated auger, 10” diameter impellar
• 10” x 4” tires

Engine: 179cc PowerMore™ OHV engine

Transmission: Dual stage operation is designed for quick, easy removal of large amount of snow.

Warranty: 2 year warranty

Features:

• Dual stage operation is designed for quick, easy removal of large amount of snow.
• Electric starter
• Arctic Polymer rotation chute
• Crank chute

Description of the Craftsman 179cc 22inch Dual Stage Snowblower

Operators can rotate the chute 180 degrees and aim the chute to either side or straight forward depending on conditions and also on objects near were you are blowing snow. The polymer chute will not rust or crack in the cold weather. Note that it does not have a crank to rotate the chute, instead it has a handle that you can use to rotate the chute to the desired direction.

Consumers can also purchase a snow shield to protect you from the wind and blowing snow as an accessory. This can be quite useful if you live in an area that has a lot of wind or if you find that the snow you are removing is consistently being blown by the wind back at you.

This is a relatively small snow blower that will fit into most garages beside the family car. At 22 inches it is one of the smaller snow blowers. However if you need to store it outside during the winter and off season, purchasing a protective cover is always a good idea to protect it from the elements and from UV rays.

Delivery:

Delivery of the Craftsman 179cc 22inch Dual Stage Snowblower can be arranged through the dealer that you purchase the machine from. There will be a delivery charge, however this is probably the most economical method unless you have access to a van or a small trailer that you can transport the snow blower on.

Accessories: Most snow blowers can add a wind shield or snow shield to them to protect you from three sides from the wind and snow. If you live in a climate with lots of wind and blowing snow this accessory is defiantly something to consider.

Online Reviews: We were unable to find any online reviews for the Craftsman 179cc 22inch Dual Stage Snowblower, however please leave your comments at the end of this blog if you have used one of these machines.

Safety & Operation

This craftsman snow blower is a powerful machine and should be treated with safety in mind. Carefully read all of the safety guidelines in the manual prior to operating the machine for the first time. Follow these guidelines to ensure that both you and the machine do not have an accident.

Prior to starting the Craftsman 179cc 22inch Dual Stage Snowblower  the first time each day, perform a quick walk around check of the machine to ensure there are no loose parts and no leaking fluids. Check the engine oil to ensure that it is at the correct level as specified by the manual. Top up if necessary.

Fill the fuel tank while the engine is cold and prior to using the machine. If you do spill fuel, wait until it has fully evaporated prior to starting the engine. Never spill fuel on a hot engine to avoid fires. Always fill the fuel tank outdoors to avoid any possibility of vapors going into your house.

Finally never point the chute in the direction of people, buildings or cars to avoid any possible damage and accidents. Sometimes chunks of ice can be thrown at high speed from the chute. If they hit something or someone, it can cause a lot of damage.

Maintenance

Like all snow blowers or snow throwers, maintenance is important. Maintain your machine to operate at a peak level for many years. Change the engine oil regularly. Check the belts for tightness and change the spark plug as required. Grease any spots outlined in the manual. If you need to leave the snow blower outside all year round, cover the machine with a proper cover. This will keep it looking new and avoid deterioration of the tires and metal components.

For more Craftsman reviews,  click here.

One of the searches that we saw on our blog is how to get a snow thrower ready for summer? It is the time of year when these sorts of tasks should be allocated since it is spring and our snow clearing days should be behind us. For many areas it also may be too soon to rake the lawn and clear it of the winters debris, so this is a really good time to make sure that your snow thrower is ready for summer storage.

There are a few simple things you can do to make sure that your snow thrower will be ready for next years snow clearing and not cause you any problems. If you are planning to do this work yourself, get out the manual and review any instructions that may be in the manual concerning storage of your snow thrower. If you plan to have a mechanic do the work for you, you may want to speak with the shop to find out the best time to take your snow thrower in for it’s annual maintenance.

Clean Gas

One of the biggest problems many consumers have is bad gas in the fall when they go to start the engine after it has sat all summer long. An easy way to preserve your gas is to purchase one of the products from your local auto store that is designed to be added to the gasoline which will keep it fresh and avoid gumming up the gas tank and the smaller parts in the carburetor. There are many products on the market, so we will not recommend any here, however you can also check with your local small engine mechanic to see what they recommend as the best one for your snow blowers engine.

Spending a few dollars on these products can save you hundreds of dollars later and a lot of frustration when your snow thrower refuses to start next winter.

Change the Engine Oil

Again follow the instructions in your manual. It is a relatively simple job to do and can add years to the life of the engine. Fresh clean oil lubricates your engine and helps to ensure that it operates at maximum efficiency. Changing the oil now after the end of the winter is a good time to do it. Before all of the sludge in the old oil hardens inside your engine.

Run the engine for a few minutes until it is warm, then shut it off, remove the spark plug wire to avoid potential accidents and drain the oil as per the instructions in the manual. The oil should be hot after the engine has been run and it will drain more quickly and completely as a result.

Check the Spark Plug

Follow the instructions in the manual and remove the spark plug to examine it’s condition. Most spark plugs will last several years. They just need cleaning and to be re-gaped from time to time to ensure they continue to meet the specs required by your engine.

Lubrication

Your snow blower may or may not need lubrication. Your manual will tell you if there are any parts that need to be oiled or greased.

Check for Broken, Loose or Malfunctioning Parts

Since you are the operator , you may already be aware of something that was not working properly during the winter. This is the time to make repairs. It is much easier to work on your machine in the warm weather than in freezing weather. Now is the time to do it, if everything is working properly. If there is nothing loose or needing adjustment, then all you may need is a quick inspection.

Check the Tire Pressure

The tires usually do not lose air. However I have found that with older machines the tires sometimes lose air over the years.  Fill them to the recommended level. If you are really particular, you should park your snow thrower in its permanent location for the summer. Then place blocks under the housing so that the wheels are off the ground. This will protect the tires.

Protect from the Environment

Every year before I put my snow blower away for the summer, I give it a good wash. This gets rid of  any sand , dirt and salt from the housing, the impellers, and the augers. Then I spray all of these same areas with a thin film of oil. This is the same oil that they use to undercoat cars. This oil will protect the housing etc from rusting in areas were the paint may have been scratched off.  After 25 years , my snow blower is still going strong and looks like new.

If you need to store it outside, cover the snow thrower with a tarp to protect it from the elements.

If you have other comments and/or suggestions, please leave them in the comments section of this blog.

Save

The CRAFTSMAN 342cc Dual Stage Snowblower comes with a 342 CC Briggs and Stratton engine, designed for cold snowy conditions. It supports a 45 inch snow clearing width with lots of power to blow the snow well away from the area you are clearing. The twin 16 inch augers and 16 inch impeller can handle even the largest drifts that you throw at it. The tires are 16 inches wide by 6.5 inches high. This is a dual stage operation snow blower i.e. the augers first break down the snow and pull it into the towards the impeller which then actually throws the snow out the chute.

With the 45 inch wide clearing width, you can clear a large driveway in no time at all or a small parking lot.  It also features a power steering feature that allows you to keep one hand on the steering mechanism and one hand can be used to change the direction of the chute to direct the snow away from the house, parked cars or other objects that you wish to avoid.  The CRAFTSMAN® 342cc, 45” Dual Stage Snowblower also comes with a standard 2 year warranty.

There is also an electric starter to start the engine and avoid having to use the backup pull chord. The headlights will also assist you in clearing snow at night in areas where there are not street lights or other natural light situations.

CRAFTSMAN 342cc Dual Stage Snowblower – Specifications:

• 45” clearing width
• 342cc Briggs & Stratton, Snow Series engine
• 16.5 ft lbs torque
• 16”” steel X-treme auger, 16”” diameter impellar
• 16” x 6.5” tires

Engine: 342cc Briggs & Stratton, Snow Series engine

Transmission:

Dual stage operation is designed for quick, easy removal of large amount of snow.

Warranty: 2 year warranty (most warranties of this type are for consumer application only. Confirm with your dealer prior to purchase)

CRAFTSMAN 342cc 45 Dual Stage Snowblower – Features:

• Dual stage operation is designed for quick, easy removal of large amount of snow.
• Electric starter
• Yard lights for early morning & nighttime
• Drift cutters
• Arctic Polymar chute, crank chute, remote chute deflection control allows operator to adjust the angle of the chute deflector without having to stop the unit.
• Power steering allows for easy maneuverability to handle obstacles. Single hand control allows you to control unit from either side by using one handle, enabling you to operate the chute with one single action & without having to stop.

Description of the CRAFTSMAN 342cc Dual Stage Snowblower

This snow blower comes with a number of features that many consumers will find useful. Especially when they are clearing snow from walkways and driveways. The electric starter for example makes it easy to start on cold winter mornings. The yard lights will light your way in the evening and early morning hours. And the drift cutters will help to cut through drifts that are higher than the snow blowers opening.

One special feature which many people will find useful is the power steering capability. It provides for single hand control of the snow blower. Operators can use their other hand to adjust the chute from side to side as well as the angle of the chute, while still controlling and steering the snow blower.

Delivery: Delivery of the CRAFTSMAN® 342cc, 45” Dual Stage Snowblower can be arranged through the dealer that you purchase the machine from. There will be a delivery charge, however this is probably the most economical method unless you have access to a van or a small trailer that you can transport the snow blower on.

Accessories: Most snow blowers can add a wind shield or snow shield to them to protect you from three sides from the wind and snow. If you live in a climate with lots of wind and blowing snow this accessory is defiantly something to consider.

Online Reviews: We were unable to find any online reviews for the CRAFTSMAN® 342cc, 45” Dual Stage Snowblower, however please leave your comments at the end of this blog if you have used one of these machines.

Safety & Operation

This craftsman snow blower is a powerful machine and should be treated with safety in mind. Carefully read all of the safety guidelines in the manual prior to operating the machine for the first time and follow these guidelines to ensure that both you and the machine do not have an accident.

Prior to starting the CRAFTSMAN® 342cc, 45” Dual Stage Snowblower the first time each day, perform a quick walk around check of the machine to ensure there are no loose parts and no leaking fluids. Check the engine oil to ensure that it is at the correct level as specified by the manual. Top up if necessary. Fill the fuel tank while the engine is cold and prior to using the machine. If you do spill fuel, wait until it has fully evaporated prior to starting the engine. Never spill fuel on a hot engine to avoid fires and always fill the fuel tank outdoors to avoid any possibility of vapors going into your house.

Finally never point the chute in the direction of people, buildings or cars to avoid any possible damage and accidents. Sometimes chunks of ice can be thrown at high speed from the chute and if they hit something, it can cause a lot of damage.

Maintenance

Like all snow blowers or snow throwers, maintenance is important for your machine to operate at a peak level for many years. Change the engine oil regularly. Check the belts for tightness. Change the spark plug as required and grease any spots outlined in the manual. If you need to leave the snow blower outside all year round, cover the machine with a proper cover. This will keep it looking new and avoid deterioration of the tires and metal components.

The John Deere Dual Stage  Snow Thrower 928E is packed with features. The engine is a 4 cycle Briggs and Stratton engine fine tuned for winter and providing 13.5 pounds gross torque. With a 28 inch clearing width two stage design and steel augers, this snow thrower will meet most consumers needs. There are 6 forward and two reverse speeds and it comes with a 3 quart fuel tank.

Operators can use one hand to steer the John Deere Dual Stage  Snow Thrower 928E and the other to manage the chute direction and rotation. There is a push button 110V electric starter. This is not a battery operated starter. You can also start the engine with the standard recoil pull chord. There is also an aluminum lo-tone muffler for quieter operation and reduced noise. The console includes an electric chute rotation control with a 200 degree turning radius which you can control with one hand and steer with the other. The chute has a large opening for increased snow capacity.

John Deere Snow Thrower 928E – Specifications:

• 13.50 foot pounds gross torque, 4 cycle engine OHV Briggs and Stratton snow series engine
• 28 inch clearing width
• 3 quart fuel tank
• 16 inch by 4.8 inch x-trac tires
• 6 forward and 2 revers with friction disk drive

Engine: 13.50 foot pounds gross torque, 4 cycle engine OHV Briggs and Stratton snow series engine

Transmission: 6 forward and 2 revers with friction disk drive

Warranty: 2 year consumer warranty and 90 day commercial warranty

John Deere Snow Thrower 928E Features:

• Free hand control for easy chute rotation
• Push button 110V electric start standard
• Recoil start with large mitten grip
• Friction disk drive with 6 forward/2 reverse speeds
• Aluminized Super Lo-Tone muffler for reduced noise
• Knob style wheel differential system
• Cast iron gear case
• Steel auger with serrated flighting
• Deluxe console and handlebar design
• Large chute opening for increased snow capacity
• New electric chute rotation with 200-degree turning radius
• Remote chute deflector
• New heated hand grips are standard
• Heavy duty embossed auger housing
• Offset halogen headlight for better visibility
• Heat-treated, reversible skid shoes
• Fresh Start® fuel cap standard
• Includes tool box and clear out brush
• This product is CARB compliant
• The John Deere Promise is not available on this product

Description of the John Deere Dual Stage  Snow Thrower 928E

This John Deere Dual Stage  Snow Thrower 928E  also comes with heated hand grips which are a big plus if you are blowing snow in sub zero degree weather were no matter what you do , your hands get cold. There is also an offset halogen headlight for additional visibility and safety during nighttime operation. There are heat treated reversible skid shoes which can also be replaced.

The fresh start fuel cap is standard and allows fuel stabilizer to be added to provide fresh fuel at all times. The engine is CARB compliant which means it meets most if not all emission requirements. The John Deere Dual Stage  Snow Thrower 928E does not qualify for the John Deere promise.

At time of preparing this review the John Deere Dual Stage  Snow Thrower 928E was listed at $1299 US. Individual dealers may offer sales prices.

Delivery

At the time of the review there were limited quantities of the John Deere Dual Stage  Snow Thrower 928E in stock. Customers could arrange for in store pickup or also arrange for delivery for an additional charge. If you do plan to pick up your brand new snow thrower, you will need a small trailer that is rated for the  weight of the snow blower. Check with the dealer for weight ratings if you plan to pick up the snow blower and save on the delivery charge.

Accessories

There were no accessories listed on the John Deere web site, however most snow throwers have snow cabs, snow covers and tire chains as options for customers to consider. If you want to be protected from the wind and the blowing snow you may want to consider a snow cab which will protect you on 3 sides and make snow blowing and clearing a much more comfortable job.

Operators who must store the John Deere Dual Stage  Snow Thrower 928E outside exposed to the elements should consider the snow cover. It protects the snow thrower from the elements and UV radiation preserving the paint and the machine for a longer period than if you leave it exposed. Use the snow cover all year round if you must store your snow thrower outside.

Tire chains also will help if you have icy conditions and want to avoid slipping and sliding around while blowing snow.

Online Reviews: There were no online reviews for the John Deere Dual Stage  Snow Thrower 928E. If you would like to add your comments, please feel free to do so to help out other consumers.

Safety & Operation

The John Deere Dual Stage  Snow Thrower 928E is an excellent machine to use and when operated safely and properly will provide you with many years of snow blowing operation.

Review the manual prior to operating the snow thrower for the first time. Review all safety guidelines and operating guidelines. Perform a circle check each time prior to operating the snow thrower the first time each day. Check the level of oil in the engine and top up if needed. Most of the time engine oil will not be needed, however it is a good habit to get into with any engine. You can also check the age of the oil be assessing how dirty the oil is. This a good gauge of when you need to change the oil.

Fill up the fuel tank so that you do not run out while blowing snow. Only fill the fuel tank when the engine is cold to avoid any possibility of fire and if you spill fuel wait until it has evaporated before starting the engine.

Maintenance

Oil changes and lubrication of the auger shaft are  the main part of the maintenance tasks for modern snow blowers. Check the manual for all recommended maintenance procedures and timing. If you do not use your John Deere Dual Stage  Snow Thrower 928E very often, as a minimum change the oil in the engine at least once per year.

The John Deere Dual Stage Snow Thrower 1130SE is one of the medium snow throwers available for consumer use and also for commercial use. Consumers should be aware that the warranty is much shorter if you plan on using this snow thrower for commercial purposes.

With a 30-inch cleaning width and a powerful 15.5 foot-pounds of torque, this John Deere Dual Stage Snow Thrower 1130SE will more than meet the needs of most consumers with large driveways and yards to clear snow.  Combined with toolless snow drift cutters, you can cut your way through even the largest snow drifts.

This machine comes with many features that operators will enjoy. From the 110 V electric start to the 6-speed friction disk transmission, with freehand control for easy chute rotation, you can manage this heavy-duty snow thrower with ease. There is also a recoil start if you need to start the snow thrower without the electric starter.

This snow thrower comes with an aluminum super lo-tone muffler to reduce the noise of the snow blower and it also is CARB compliant to meet the latest emission controls.

John Deere Dual Stage Snow Thrower – Specifications:

• 15.5 foot-pounds torque, with a 4-cycle OHV Briggs and Stratton engine
• 6 forward, 2 reverse friction disk drive system
• 30-inch cleaning width
• 4-quart fuel tank
• 16-inch by 6.5-inch x-trac tires

Engine: 15.5 foot-pounds torque, with a 4-cycle OHV Briggs and Stratton snow series max engine

Transmission: 6 forward, 2 reverse friction disk drive system

Warranty: 2-year consumer warranty, 90-day commercial warranty ( The John Deere promise is not available on this product)

Features:

• Free hand control for easy chute rotation
• Push button 110V electric start standard
• Recoil start with a large mitten grip
• Easy Steer® drive system gives continuous power to both wheels and auto speed adjustment
• Aluminized Super Lo-Tone muffler for reduced noise
•         Cast iron gear case
• Steel auger with serrated flighting
• Deluxe console and handlebar design
• Large chute opening for increased snow capacity
• New dash-mounted electric chute rotation with a 200-degree turning radius
• Remote chute deflector
• Heavy duty embossed auger housing
• Heated hand grips with two settings
• Offset halogen headlight for better visibility
• Drift cutters standard
• Heat-treated, reversible skid shoes
• Throttle control
• Fresh Start® fuel cap standard
• Includes tool box and clear-out brush
• This product is CARB compliant

Description of the John Deere Dual Stage Snow Thrower 1130SE

The John Deere Dual Stage Snow Thrower 1130SE sports a large chute for increased snow capacity, and operators can control the chute direction from the dash with a new dash electric control feature.

The hand grips are heated to provide additional comfort during those extra cold days and nights when you are out blowing snow. Cold hands are no fun, especially when you have a large yard to deal with.

There is an offset halogen light to provide extra visibility after the sun sets and it is too dark to clear snow. There are also reversible skid shoes to protect your driveway, a 4-quart fuel tank,  and a tool box with a clear-out brush.

This unit comes with a fresh start fuel cap which allows you to add fuel additives to keep the fuel fresh for maximum efficiency and operation.

The John Deere Dual Stage Snow Thrower 1130SE was retailing for $1499 US at the time of writing.

Delivery

Customers can arrange for in-store pickup or delivery. Customers who pick up the snow thrower will need a small trailer to transport the snow blower. It must be rated to carry the weight of this machine. Delivery can be arranged for an additional cost depending on your proximity to the store you are making your purchase.

Accessories

Optional accessories were not listed on the website, however, most snow throwers come with the option to purchase snow cabs, chains, and snow covers. Snow cabs provide protection to the operator from the wind and blowing snow during snow-blowing operations. Usually, they protect you on three sides and make it much more comfortable when blowing snow.

Snow covers provide protection to your snow thrower when you need to store it outside. They provide protection from UV rays and general protection from the elements which will help to ensure that your John Deere Dual Stage Snow Thrower 1130SE lasts much longer.

Online Reviews: We did not observe any online reviews on the manufacturer web site. Feel free to leave comments here.

Safety & Operation

Operators are always encouraged to read the manual for the John Deere Dual Stage Snow Thrower 1130SE prior to operating the machine for the first time. Become familiar with the operation of the snow blower and also the safety features and operation of the snow blower.

Prior to starting the John Deere Dual Stage Snow Thrower 1130SE, each day operators should perform a quick circle check to confirm everything is in working order and there are no loose parts. Check the engine oil and top up if needed. Also, fill the fuel tank to avoid running out while blowing snow. Fill the fuel tank while the engine is cool to avoid any possibility of fire. If you do spill gasoline, wait until it has evaporated before starting the engine.

Always shut the engine off prior to performing any maintenance or clearing the auger of ice and snow.

Maintenance

The John Deere Dual Stage Snow Thrower 1130SE maintenance schedule is outlined in the manual. Depending on how often the machine is used, you will have to change the oil perhaps as often as once a month, however, in a light snow year you may need to change the oil only once per year. Always keep the engine oil fresh to prolong the life of the engine. Lubricate all recommended parts as per the schedule outlined in the manual.

The Yard Machine Snow Thrower H65FH comes with a powerful 357 cc engine that has been winterized for the toughest winters. Combined with a 30-inch clearing width and a 21-inch high intake, operators will make short work of just about any snow in your driveway and yard. There are 6 forward and two reverse gears and the  Yard Machine Snow Thrower H65FH sports 16-inch snow hog tires with heavy-duty treads to give you maximum traction in most snow conditions. Add tire chains if you need that extra bit of traction, particularly in icy conditions.

The Yard Machine Snow Thrower H65FH comes with a number of accessories that can be purchased with the snow thrower. The snow cab is particularly useful if you have a lot of wind which will blow the snow around or worse back in your face. Protect yourself with the snow cover on 3 sides. Customers can also protect their snow thrower with a snow cover from UV radiation as well as wind, snow, and rain. Keep your Yard Machine Snow Thrower H65FH in excellent condition even if you have to store it outside all year round.

Yard Machine Snow Thrower H65FH – Specifications:

• 357 cc Power More 4 cycle OHV winterized engine
• 30-inch clearing width and 21-inch intake height
• 6 forward speeds and 2 reverse speeds
• 12-inch serrated augers
• 12-inch impeller
• 16 inch by6.5 inch snow hog tires

Engine: 357 cc Power More 4 cycle OHV winterized engine

Transmission: 6 forward speeds and 2 reverse speeds

Warranty: 2-year limited warranty

Features:

• Electric and manual start
• Single-hand controls leave one hand free to adjust the chute direction
• Manual chute and crank to direct snow in the direction you want
• In-dash yard light improves visibility at night
• Heavy-duty reversible and adjustable slide shoes
• Space-saving folding handles
• Arctic tested high impact 5-inch polymer chute, does not rust dent or crack
• Extra shear bolts included
• Assembles in minutes
• Oil pre-filled engine

Description of the Yard Machine Snow Thrower H65FH

The Yard Machine Snow Thrower H65FH also has a large number of features that operators may enjoy. The engine can be started electrically or by manual start. You can operate and steer the snow thrower with one hand while adjusting the snow chute to throw the snow in any direction. If you need to clear your driveway of snow at night, there is an in-dash light to provide additional visibility for you to see your way.

The handles fold for easy storage in tight places and The Yard Machine Snow Thrower H65FH comes with extra sheer bolts and the engine is filled with oil when it arrives. Sheer bolts are used to prevent damage to the auger if you were to hit something with the auger that prevents them from turning. They are easily replaced and you should always have some on hand.  The Yard Machine Snow Thrower H65FH comes with a 2-year limited warranty as well.

Delivery

The Yard Machine Snow Thrower H65FH can be purchased at the following stores: AJ Walker, Canadian Tire, Castle Building Centers Group Ltd, Central Supplies, CO-OP Atlantic, Cooperative Federee de Quebec, Federated Co-operatives Limited, Copps build all, Country Digest, FS, Do-it Center, Groupe BNR Inc., Home Hardware Stores Ltd, Piercys, Pro-Hardware, Kent Building Materials, Laferte, Lowe’s, Materieaux Laurentions, McDiarmid Lumber, Patrick Morin, Peavy Mart, Potvin & Bouchard Inc., Reno Depot Inc., Rona, Sodisco- Howden, Tim-BR Mart, Truserv, TSC Stores, and UFA.

Many of these stores will also arrange for delivery of the Yard Machine Snow Thrower H65FH for a delivery charge, however, consumers can also pick up their machines as well at these stores and save on the delivery fee.

Accessories

Snow Cab – assembles in a few minutes and protects the operator from blowing snow and wind. The vinyl is freeze-resistant and rip-resistant woven polyethylene. Closed on three sides the snow cab provides excellent protection for the operator while blowing snow.

Snow Cover – protect your snow blower from the elements with the deluxe snow cover. Whether you store your snow thrower inside or out, the snow cover will protect your machine from UV radiation and natural elements. It is UV-treated and mildew and rot-resistant.

Snow Tire Chains – provide extra traction on icy surfaces. With a zig-zag design, tire chains can make a huge difference when conditions are icy and difficult to find traction.

Poly Slide Shoes – can be purchased separately to replace existing shoes.

Online Reviews: There were no online reviews provided by the manufacturer’s website.

Safety & Operation

The Yard Machine Snow Thrower H65FH is similar to most snow throwers. Operated safely it will be a great machine that does the job for you, efficiently and easily.  Before operating the snow thrower for the first time, read the manual and note all safety guidelines and operating procedures. Following these guidelines will help you avoid any accidents and damage to the snow thrower or to objects around you.

Prior to operating the first time each day, always check the engine oil and top up if needed. Fill the fuel tank while the engine is cool and to avoid running out while blowing snow. Try to only fill the fuel tank when the engine is cool and always turned off. If you do spill fuel, wait until it has evaporated before starting the engine to avoid the possibility of fire.

When blowing snow always point the chute away from other people, the house and cars, or other objects that could be damaged by icy projectiles that are sometimes picked up and blown at great speed from the chute.

Maintenance

Maintenance is relatively simple. Follow the guidelines outlined in the manual and monitor your snow blower for loose parts and any abnormal operation. Repair or fix any problems you find to avoid further damage.

Change the oil on a regular basis following the guidelines in the manual and change the oil a minimum of once per season to protect your engine.

Save