Snow Blowers


Cub Cadet 524WE Snow Thrower

April 21st, 2011 ernie Posted in 24 " Wide Blowers, Cub Cadet No Comments »

The Cub Cadet 524WE Snow Thrower has 24 inches of clearing width which is suitable for pretty much all urban situations. If you have a really long Cub Cadet 524WE Snow Throwerdriveway or a large area to clear you might consider a snow blower with a wider clearing width, if time is an issue for you.

This snow blower comes with the standard 6 forward and 2 reverse gears that all snow blowers of this type come with. It also has a 208 cc engine and is a 4 cycle engine. One of the features that many snow throwers come with these days is the Posi Steer system. Unfortunately this snow blower does not come with this feature. Without this system, it is a bit more difficult to control the direction of the machine and make adjustments in direction as you encounter rutted or difficult areas of snow to clear.

Cub Cadet 524WE Snow Thrower – Specifications:

  • 208cc Cub Cadet® OHV 4-Cycle Engine
  • 24″ Clearing Width
  • 21″ Clearing Height
  • 6 Forward / 2 Reverse Speeds
  • 4-Way Pitch Control & Chute Rotation
  • 15″ x 5″ X-TRAC™ Tires
  • 3-Year Limited Residential & 1-Year Limited Commercial Warranty

Engine: This Cub Cadet 524WE Snow Thrower comes with a 208cc Cub Cadet® OHV 4-Cycle Engine

Transmission: This snow blower has the standard 6 Forward / 2 Reverse Speeds

Warranty: This Cub Cadet 524WE Snow Thrower comes with a 3-Year Limited Residential & 1-Year Limited Commercial Warranty

Features:

  • In-Dash Headlight
  • COOL BLUE™ Rust-Resistant, Non-Marking, Reversible Skid Shoes
  • All-Wheel / Positive Traction Drive System

Description of the Cub Cadet 524WE Snow Thrower

This

Delivery

Most customers will have to arrange for delivery of their new snow blowers. They are far too big to take home in your car. You will need a trailer, rent a van or arrange for delivery by the store. There will be a charge for this service. But it will be the easiest way to arrange for your new snow blower to be delivered to your home. Some stores will rent their vans/trucks to you for a very low price for 2 hours. This is more than enough time for you to take your purchases home. Lowes and Home Depot do this as well as others.

Accessories

Most snow blowers can be purchased with tire chains to provide extra traction in icy situations. In addition, snow shields are also a good idea. They protect you from windy conditions and snow being blown back at you from the wind.

Safety & Operation

A snow blower is a powerful machine and should be treated with safety in mind. Carefully read all of the safety guidelines in the manual prior to operating the machine for the first time. Follow these guidelines to ensure that both you and the machine do not have an accident.

Prior to starting your snowblower the first time each day, perform a quick walk around check of the machine to ensure there are no loose parts and no leaking fluids. Check the engine oil to ensure that it is at the correct level as specified by the manual. Top up if necessary. Fill the fuel tank while the engine is cold and prior to using the machine. If you do spill fuel, wait until it has fully evaporated prior to starting the engine. Never spill fuel on a hot engine to avoid fires and always fill the fuel tank outdoors to avoid any possibility of vapors going into your house.

Finally never point the chute in the direction of people, buildings or cars to avoid any possible damage and accidents. Sometimes chunks of ice can be thrown at high speed from the chute and if they hit something, it can cause a lot of damage.

Never work on your snow blower with the engine running – this seems like an obvious thing but people still do it and are hurt, sometimes badly, every year. Always turn it off before you do any maintenance, add fuel, check the oil, fix the chains on the tires, or clear the augers of snow.

Clearing Snow from the Augers

This is were lots of people are hurt every year. Before you try to clear snow that is plugging the augers, shut the engine off to avoid sudden turning of the augers or the impeller which could cause lots of damage to fingers, hands and arms.

Use Snow Clearing Tool – This is the really important part. You have plugged the augers with snow, you have shut the machine off and now you are trying to clear the snow away. Never place your hands inside the augers to get at the snow. Use a broom handle if you have an old machine, or the snow clearing tool that came with your newer machine to clear the snow. You can also purchase these tools from most stores as an extra if you break yours or if you have an older machine which does not have one. This is the safe way to clear snow from around the augers and the impeller.

Sometimes the snow is so compacted, that as you clear it away, it allows the augers to turn as a result of built up tension in the pulley mechanism. Better to have a broom handle stuck in there than your hands!

Most new snow blowers come with a snow clearing tool which you can use for this purpose. Always use this tool and never use your hands. If you have an older machine, an old broom handle will do the trick as well.

Maintenance

Like all snow blowers or snow throwers, maintenance is important for your machine to operate at a peak level for many years. Change the engine oil regularly, check the belts for tightness, change the spark plug as required and grease any spots outlined in the manual. If you need to leave the snow blower outside all year round, cover the machine with a proper cover to keep it looking new and avoid deterioration of the tires and metal components.

 

 

AddThis Social Bookmark Button

MTD Gold Snow Thrower M53LE

November 21st, 2010 ernie Posted in 24 " Wide Blowers, MTD No Comments »

The MTD Gold Snow Thrower M53LE snow blower comes with a powerful 208cc winterized engine that will clear 24 inches of snow at a time and the best part is that MTD Gold Snow Thrower M53LEit comes with heated handles. This really separates it from other snow blowers. If you have been out blowing snow in really cold weather with freezing fingers, you will really appreciate heated handles.

There are 6 forward speeds and 2 reverse speeds to provide you with the best pace for the snow conditions you are dealing with. Lot’s of snow means you may want to go a bit slower, while a light snow covering means you can go at your own comfortable walking speed. Another big advantage of this snow thrower is the steerable wheel drive feature. Just touch a button to change directions with this powerful snow blower. No more wrestling the snow blower to get it to go in the direction you need it to go!

There are lots of features on this snow thrower. A lot of people do not want to have to pull the starter chord. With the MTD Gold Snow Thrower M53LE snow blower, you can use the electric start to start your engine!

MTD Gold Snow Thrower M53LE – Specifications:

  • 208cc PowerMore™ OHV winterized engine runs quieter and cleaner
  • 24” clearing width
  • 6 forward, 2 reverse speeds: select the best pace for both you and the snow conditions
  • 12” X-treme augers: each auger flight has its own shear bolts to allow augers to continue working if one goes down
  • 12” impeller and 21” intake height
  • 15″ x 5″ X-trac snow tires for maximum traction

Engine: This MTD Gold Snow Thrower M53LE has a  208cc PowerMore™ OHV winterized engine which runs quieter and cleaner

Transmission: 6 forward, 2 reverse speeds: select the best pace for both you and the snow conditions

Warranty: This MTD Gold Snow Thrower M53LE has a 3 year limited warranty for true peace of mind

Features:

  • Steerable wheel drive turns snow blower left or right with the click of a trigger
  • Electric Start: No need to pull. Manual back-up included
  • NEW 4-way chute control – direct snow up, down, and side-to-side
  • Taller poly chute focuses concentrated blasts of snow – arctic tested: won’t rust, dent, or crack!
  • Heated handle grips keep hands warm
  • Single hand controls: locks in speed leaving one hand free to operate chute
  • In-dash yard light: for improved visibility and safety
  • Poly slide shoes: help prevent driveway marks and scratches
  • Tool-less drift cutters to cut away at deep snow drifts
  • Space saving, folding handles for easy storage
  • Automotive style powder coated paint for a durable, long lasting finish
  • Extra shear bolts included
  • Assembles in minutes – no tools required
  • Oil pre-filled in engine – gas it up and you’re ready to go!

Description of the  MTD Gold Snow Thrower M53LE

Among the features of this snow thrower that really stand out, are the yard light, the direction control, the heated handle grips, the folding handles and tool less drift cutters.

Once you get your new snow thrower home, set up is easy, just unfold the handles, no tools required, add fuel to the fuel tank and you are ready to go. There is oil already in the engine. Even though the manufacturer has provided oil in the engine, we always encourage our readers to check the level of engine oil before starting the engine.

Delivery

Most customers will have to arrange for delivery of their new snow blowers. They are far too big to take home in your car. You will need a trailer, rent a van or arrange for delivery by the store that you are purchasing the snow blower from. There will be a charge for this service. But it will be the easiest way to arrange for your new snow blower to be delivered to your home. Some stores will rent their vans/trucks to you for a very low price for 2 hours for you to take your purchases home. Lowes and Home Depot do this as well as others.

Accessories

Most snow blowers can be purchased with tire chains to provide extra traction in icy situations. In addition, snow shields are also a good idea if you want to protect yourself from windy conditions and snow being blown back at you from the wind.

Safety & Operation

This MTD snow blower is a powerful machine and should be treated with safety in mind. Carefully read all of the safety guidelines in the manual prior to operating the machine for the first time and follow these guidelines to ensure that both you and the machine do not have an accident.

Prior to starting the MTD Gold Snow Thrower M53LE Dual Stage Snowblower the first time each day, perform a quick walk around check of the machine to ensure there are no loose parts and no leaking fluids. Check the engine oil to ensure that it is at the correct level as specified by the manual. Top up if necessary. Fill the fuel tank while the engine is cold and prior to using the machine. If you do spill fuel, wait until it has fully evaporated prior to starting the engine. Never spill fuel on a hot engine to avoid fires and always fill the fuel tank outdoors to avoid any possibility of vapors going into your house.

Finally never point the chute in the direction of people, buildings or cars to avoid any possible damage and accidents. Sometimes chunks of ice can be thrown at high speed from the chute and if they hit something, it can cause a lot of damage.

MTD Gold Snow Thrower – Maintenance

Like all snow blowers or snow throwers, maintenance is important for your machine to operate at a peak level for many years. Change the engine oil regularly, check the belts for tightness, change the spark plug as required and grease any spots outlined in the manual. If you need to leave the snow blower outside all year round, cover the machine with a proper cover to keep it looking new and avoid deterioration of the tires and metal components.

 

AddThis Social Bookmark Button

Bolens Two Stage Snow Thrower H53LE

October 21st, 2010 ernie Posted in 24 " Wide Blowers, Bolens No Comments »

The Bolens Two Stage Snow Thrower H53LE has a 208 cc engine and a 24 inch snow clearing width with a 4 way chute control for aiming the snow in the right direction. Bolens snow thrower H53LEThe augers and the impeller are both 12 inches and the augers come with extra shear bolts in case you break the shear bolts that are pre-installed. The tires are 15 inches in diameter.

There are several features that will appeal to many people who are worried about having to struggle with a heavy snow blower. This snow blower is an electric start model so no need to pull the chord to start the engine. It also comes with steerable wheel drives to turn the snow blower and there are heated handle grips which will appeal to anyone who has frozen their fingers while blowing snow in really cold weather. This is probably one of the best features on this machine in terms of comfort!

Bolens Two Stage Snow Thrower H53LE – Specifications:

  • 208cc PowerMore™ OHV winterized engine runs quieter and cleaner
  • 24” clearing width
  • 6 forward, 2 reverse speeds: select the best pace for both you and the snow conditions
  • 4-way chute control – direct snow up, down, and side-to-side
  • 12” X-treme augers: each auger flight has its own shear bolts to allow augers to continue working if one goes down
  • 12” impeller and 21” intake height
  • 15″ x 5″ snow tires for maximum traction

Engine: This Bolens Two Stage Snow Thrower H53LE comes with a 208cc PowerMore™ OHV winterized engine runs quieter and cleaner

Transmission: There are  6 forward, 2 reverse speeds: select the best pace for both you and the snow conditions

Warranty: This 4 year limited warranty for true peace of mind

Features:

  • Steerable wheel drive turns snow blower left or right with the click of a trigger
  • Electric Start: No need to pull. Manual back-up included
  • Taller poly chute focuses concentrated blasts of snow – arctic tested: won’t rust, dent, or crack!
  • Heated handle grips keep hands warm
  • Single hand controls: locks in speed leaving one hand free to operate chute
  • In-dash yard light: for improved visibility and safety
  • Poly slide shoes: help prevent driveway marks and scratches
  • Tool-less drift cutters to cut away at deep snow drifts
  • Space saving, folding handles for easy storage
  • Automotive style powder coated paint for a durable, longlasting finish
  • Extra shear bolts included
  • Assembles in minutes – no tools required
  • Oil pre-filled in engine – gas it up and you’re ready to go!

Description of the Bolens Two Stage Snow Thrower H53LE

You can be ready to go in minutes. Just install the oil as instructed in the manual and add fuel. You will also need to unpack the handles and get the machine ready for use. Just follow the instruction manual, It only takes a couple of minutes. If you have a tight space to store the machine, don’t worry, the handles fold for easy storage. all around this is a great little machine and even though it only has a 24 inch width, which makes it easier to store, this snow blower will clear snow quite well for most consumers.

Delivery

Most customers will have to arrange for delivery of their new snow blowers. They are far too big to take home in your car, so you will need a trailer, rent a van or arrange for delivery by the store that you are purchasing the snow blower from. There will be a charge for this service, but it will be the easiest way to arrange for your new snow blower to be delivered to your home.

Accessories

Most snow blowers can be purchased with tire chains to provide extra traction in icy situations. In addition, snow shields are also a good idea if you want to protect yourself from windy conditions and snow being blown back at you from the wind. They can be purchased for most snow blowers including the Bolens Two Stage Snow Thrower H53LE.

Online Reviews: We were unable to find any online reviews for the Bolens Two Stage Snow Thrower H53LE, however please leave your comments at the end of this blog if you have used one of these machines.

Safety & Operation

This Bolens snow blower is a powerful machine and should be treated with safety in mind. Carefully read all of the safety guidelines in the manual prior to operating the machine for the first time and follow these guidelines to ensure that both you and the machine do not have an accident.

Prior to starting the Bolens Two Stage Snow Thrower H53LE  the first time each day, perform a quick walk around check of the machine to ensure there are no loose parts and no leaking fluids. Check the engine oil to ensure that it is at the correct level as specified by the manual. Top up if necessary. Fill the fuel tank while the engine is cold and prior to using the machine. If you do spill fuel, wait until it has fully evaporated prior to starting the engine. Never spill fuel on a hot engine to avoid fires and always fill the fuel tank outdoors to avoid any possibility of vapors going into your house.

Finally never point the chute in the direction of people, buildings or cars to avoid any possible damage and accidents. Sometimes chunks of ice can be thrown at high speed from the chute and if they hit something, it can cause a lot of damage.

Maintenance

Like all snow blowers or snow throwers, maintenance is important for your machine to operate at a peak level for many years. Change the engine oil regularly. Check the belts for tightness. Change the spark plug as required and grease any spots outlined in the manual. If you need to leave the snow blower outside all year round, cover the machine with a proper cover to keep it looking new and avoid deterioration of the tires and metal components.

 

 

AddThis Social Bookmark Button

Craftsman 208cc 24inch Dual Stage Snowblower

May 7th, 2010 ernie Posted in 24 " Wide Blowers, Craftsman 2 Comments »

The Craftsman 208cc 24inch Dual Stage Snowblower has a powerful 208 cc PowerMore OHV engine to provide that extra power you need to go through craftsman 208cc 24 inch snow blowerthe deepest drifts of snow and ice. Twelve inch augers with a 12 inch impeller provides a dual stage snow clearing with lots of snow clearing capability and the 24 inch wide clearing width will make short work of most driveways in urban American and Canada.

Operators can control the snow blower with one hand from either while at the same time managing the direction of the chute so that snow can be thrown in what ever direction is needed to avoid hitting buildings, windows or cars. The arctic polymer chute will not crack and will not rust and will withstand the rigor of dealing with snow an ice. Never point the chute in the direction of another person to avoid any possibility of them being hit with ice chips.

Craftsman 208cc 24inch Dual Stage Snowblower – Specifications:

  • 24” clearing width
  • 208cc PowerMore™ OHV engine
  • 12” steel X-treme auger, 12” diameter impeller
  • 15” x 5” tires

Engine: 208cc Briggs & Stratton, Snow Series engine

Transmission: Dual stage operation is designed for quick, easy removal of a large amount of snow.

Warranty: 2 year warranty

Features:

  • Dual stage operation is designed for quick, easy removal of a large amount of snow.
  • Electric starter
  • Arctic Polymer rotation chute
  • Crank chute
  • Single hand control allows you to control unit from either side by using one handle, enabling you to operate the chute with one single action & without having to stop.

Description of the Craftsman 208cc 24inch Dual Stage Snowblower

This snow blower comes with a crank to turn the chute in a 180 degree direction. There is also an electric starter to start the engine.

The 15 inch tires provide lots of traction even in icy conditions. Add optional chains if you have to deal with lots of ice. Consumers can also purchase an optional cover if they need to store their snow blower outside in the elements.

At the time of preparing this post, Craftsman had added a screen for customers to leave comments and review ratings. This model had two very positive reviews extolling the virtues of this snow blower.

Delivery: Delivery of the Craftsman 208cc 24inch Dual Stage Snowblower can be arranged through the dealer that you purchase the machine from. There will be a delivery charge, however this is probably the most economical method unless you have access to a van or a small trailer that you can transport the snow blower on.

Accessories: Most snow blowers can add a wind shield or snow shield to them to protect you from three sides from the wind and snow. If you live in a climate with lots of wind and blowing snow this accessory is defiantly something to consider.

Online Reviews: We were unable to find any online reviews for the Craftsman 208cc 24inch Dual Stage Snowblower, however please leave your comments at the end of this blog if you have used one of these machines.

Safety & Operation

This craftsman snow blower is a powerful machine and should be treated with safety in mind. Carefully read all of the safety guidelines in the manual prior to operating the machine for the first time. Follow these guidelines to ensure that both you and the machine do not have an accident.

Prior to starting the Craftsman 208cc 24inch Dual Stage Snowblower  the first time each day, perform a quick walk around check of the machine. Ensure there are no loose parts and no leaking fluids. Check the engine oil to ensure that it is at the correct level as specified by the manual. Top up if necessary. Fill the fuel tank while the engine is cold and prior to using the machine. If you do spill fuel, wait until it has fully evaporated prior to starting the engine. Never spill fuel on a hot engine to avoid fires. Always fill the fuel tank outdoors to avoid any possibility of vapors going into your house.

Finally never point the chute in the direction of people, buildings or cars to avoid any possible damage and accidents. Sometimes chunks of ice can be thrown at high speed from the chute and if they hit something, it can cause a lot of damage.

Maintenance

Like all snow blowers or snow throwers, maintenance is important for your machine to operate at a peak level for many years. Change the engine oil regularly. Check the belts for tightness. Change the spark plug as required. Grease any spots outlined in the manual. If you need to leave the snow blower outside all year round, cover the machine with a proper cover. The cover will help to keep it looking new and avoid deterioration of the tires and metal components.

For more posts about Craftsman snow blowers, click here.

AddThis Social Bookmark Button

Craftsman 205cc 24inch Dual Stage Snowblower

April 28th, 2010 ernie Posted in 24 " Wide Blowers, Craftsman 2 Comments »

The Craftsman 205cc 24inch Dual Stage Snowblower has a large 24 inch clearing width with 10 inch steel augers with saw tooth teeth to break down Craftsman 205cc 24inch Dual Stage Snowblowerthe hardest snow. the 9 inch impeller combined with the 205 cc engine made by Briggs and Stratton completes this powerful combination generating 9 foot pounds of torque.

This snow blower is ideal for most consumers who just need to clear their driveways of snow and get on the road first thing in the morning. It is large enough to make quick work of most snow conditions, yet small enough to fit in the garage along side the car.

The combination of saw tooth auger and impeller makes this dual stage snow blower an affordable powerful machine. Although it does not have some of the features that large more expensive machines have, it is price economically and is affordable for many urban consumers.

Craftsman 205cc 24inch Dual Stage Snowblower – Specifications:

  • 24” clearing width
  • 205cc Briggs & Stratton, Snow Series engine
  • 9 ft lbs torque
  • 10” steel sawtooth auger, 9” diameter impellar
  • 13” x 5” tires, wheel lock

Engine: 205cc Briggs & Stratton, Snow Series engine

Transmission: Dual stage operation is designed for quick, easy removal of large amount of snow.

Warranty: 2 year warranty

Features:

  • Dual stage operation is designed for quick, easy removal of large amount of snow.
  • Electric starter
  • Steel rotation chute
  • Crank chute

Description of the Craftsman 205cc 24inch Dual Stage Snowblower

The steel rotation chute can be hand cranked in a full 180 degree direction to allow you to blow snow in just about any direction. The Craftsman 205cc 24inch Dual Stage Snowblower also comes with an electric starter which makes starting this engine easy on cold days. There is also a backup pull chord to start the engine.

It also comes with a 2 year warranty. Craftsman has one of the best reputations in the business. Sears has started allowing customer feedback on its site and so far this machine has one very positive review with a 4 out of 5 rating.

Although it is a bit difficult, operators can hold both engagement controls in place for forward motion and snow throwing with one hand and rotate the chute by cranking the chute around at the same time.

More Issues

Delivery: Delivery of the Craftsman 205cc 24inch Dual Stage Snowblower can be arranged through the dealer that you purchase the machine from. There will be a delivery charge, however this is probably the most economical method unless you have access to a van or a small trailer that you can transport the snow blower on.

Accessories: Most snow blowers can add a wind shield or snow shield to them to protect you from three sides from the wind and snow. If you live in a climate with lots of wind and blowing snow this accessory is defiantly something to consider.

Online Reviews: We were unable to find any online reviews for the Craftsman 205cc 24inch Dual Stage Snowblower, however please leave your comments at the end of this blog if you have used one of these machines.

Safety & Operation

This craftsman snow blower is a powerful machine and should be treated with safety in mind. Carefully read all of the safety guidelines in the manual prior to operating the machine for the first time. Follow these guidelines to ensure that both you and the machine do not have an accident.

Prior to starting the Craftsman 205cc 24inch Dual Stage Snowblower. Perform a quick walk around check of the machine to ensure there are no loose parts and no leaking fluids. Check the engine oil to ensure that it is at the correct level as specified by the manual. Top up if necessary. Fill the fuel tank while the engine is cold and prior to using the machine. If you do spill fuel, wait until it has fully evaporated prior to starting the engine. Never spill fuel on a hot engine to avoid fires and always fill the fuel tank outdoors to avoid any possibility of vapors going into your house.

Finally never point the chute in the direction of people, buildings or cars to avoid any possible damage and accidents. Sometimes chunks of ice can be thrown at high speed from the chute. If they hit something, it can cause a lot of damage.

Maintenance

Like all snow blowers or snow throwers, maintenance is important for your machine to operate at a peak level. Change the engine oil regularly, check the belts for tightness, and change the spark plug as required. Grease any spots outlined in the manual. If you need to leave the snow blower outside all year round, cover the machine with a proper cover. Keep it looking new and avoid deterioration of the tires and metal components.

For more information about other Craftsman snow blower models, click here.

AddThis Social Bookmark Button

Bolens Snow Thrower 2695

February 7th, 2010 ernie Posted in 24 " Wide Blowers, Bolens No Comments »

The Bolens Snow Thrower Model 2695 comes with a 208 cc PowerMore OHV engine that has been design to run quieter and cleaner than many other models in the past.Bolens Snow Thrower 2695 With a 24 inch clearing width and 6 forward and 2 reverse speeds the Bolens Snow Thrower  can handle most consumer requirements for clearing snow from driveways and walkways.

As a convenience a steerable drive turns the snow thrower left or right with the flick of a switch.  In addition the Bolens Snow Thrower 2695 comes with an electric start engine making starting an easy task on those cold winter months. The Bolens Snow Thrower 2695 even comes with heated handle grips to keep your hands warm in the coldest of weather. Other features of the Bolens Snow Thrower 2695 include 4 way chute control, poly side shoes to protect your driveway from marks, fingertip controls to provide power steering and a taller chute that gives you more control over were you blow the snow from your driveway and walkways.

Bolens Snow Thrower 2695 – Specifications

  • 208 CC PowerMore OHV winterized engine
  • 24 inch cleaning width
  • 6 forward and 2 revers speeds
  • 12 inch x-treme augers
  • 12 inch impeller
  • 21 inch intake height
  • 15 inch by 5 inch x-trac tires

Engine: 208 cc PowerMore OHV engine

Transmission: 6 forward and 2 reverse speeds

Warranty: 4 year limited warranty

Features:

  • Steerable wheel drive turns the snow thrower left or right with the click of a trigger
  • Electric start
  • 4 way chute control – up , down and side to side
  • Poly chute will not dent , rust or crack
  • Heated handle grips keep hands warm
  • Single hand controls locks in speed leaving one hand free to operate the chute
  • In dash yard light
  • Poly side shoes help to prevent driveway marks and scratches
  • Tool less drift cutters
  • Space saving folding handles for easy storage
  • Extra shear bolts included
  • Oil pre-filled engine on delivery

Description of the Bolens Snow Thrower 2695

The Bolens Snow Thrower 2695 comes with many features and depending on were you live some will be more interesting than others. As a long time user of snow blowers, having heated handles for those minus 20 degree temperatures would be extremely useful.  The Bolens Snow Thrower 2695 is a standard two stage snow thrower with a few bells and whistles thrown in that make it stand out.

Electric start makes the Bolens Snow Thrower 2695 very easy to use. No more yanking on the starter chord. Steerable controls with the click of a trigger avoids any of the struggling you might have done in the past to steer your snow thrower. Poly side shoes, tool less drift cutters, folding handles, yard light and of course those heated handles are just a few of the features that make the Bolens Snow Thrower 2695 stand out from the competition.

Delivery: The Bolens Snow Thrower 2695 can be purchased across Canada at Lowes hardware stores.

Accessories: Consumers can purchase optional accessories for the Bolens Snow Thrower 2695. The snow cab is constructed from heavy duty vinyl as well as freeze and rip resistant material. The snow cab can be added in minutes and protects the operator from wind and blowing snow. If you need to leave your Bolens Snow Thrower 2695 outside, then protect your investment by purchasing the optional snow cover.  The snow cover is UV treated, rot and mildew resistant, triple edge binding, fits most two stage snow throwers up to 33 inches. Protect your investment from the elements.

Safety & Operation

Safety while operating the Bolens Snow Thrower 2695 is very important to avoid accidents to yourself, those around you and objects such as homes and cars that are nearby. First of all, always read the manual and understand all of the safety conditions that the manual covers.

There are a few important safety rules that everyone should follow to avoid accidents. First of all never point the chute in the direction of another person , home or car while operating the Bolens Snow Thrower. Sharp bits of ice and snow can be thrown from the snow blower at high velocity. These objects can cause a lot of damage when they strike a person, home or car. You don’t want to hurt anyone and you do not want to have to pay for damages caused to cars and homes.

The second major safety item is to always shut the Snow Thrower off before trying to do any maintenance on the machine or clearing snow and ice from the auger or impeller area. Also avoid wearing loose clothing such as scarves near the Snow Thrower . The can quickly get caught in moving parts causing severe discomfort.

When you are finished using the Bolens Snow Thrower for the day , clean off all off the snow and ice from the housing and from inside the auger and impeller area. Make sure the machine is off before doing this. Clean off the machine after every use will help to preserve the housing of the Bolens Snow Thrower.

Before starting the Bolens Snow Thrower each time, always check the engine oil and the fuel levels. Top up as appropriate. Checking the oil level in particular will avoid any chance of low oil in the engine causing engine damage.

Maintenance

Maintenance of the Bolens Snow Thrower is pretty straight forward. Follow the steps outlined in the manual. The engine oil should be changed often if you are a heavy user of the Bolens Snow Thrower. Otherwise change the oil in the engine at least once per year. Also add grease to all grease points as instructed in the manual. Changing the oil is pretty straight forward and consumers are reminded to dispose of the oil properly. Take old oil into proper disposal areas.

Save

AddThis Social Bookmark Button


?>


Web Content Development