The auger could turn 90 degrees once the pressure is released. This would be sufficient to slice a finger or even a hand off. Back to replacing belts on Snowblowers.
The first step is to check the condition of the belts. There is a plastic housing that covers the pulleys and belts. It is located between the engine and the chute of the snowblower. Remove two bolts that hold it in place and then remove the plastic housing.
You should see two belts, each on a different set of pulleys. Make sure the engine is turned off and cannot be started. Examine the condition of the belts. Look for fraying or splitting.
Check your manual for the correct belt size. Replace both if frayed. You might as well replace both even though one of them may appear to be fine.
Depending on the snow blower you may have to temporarily separate the engine from the blower housing. Access the belts by splitting the machine in the middle. Replace the belts and then reassemble the housing with the engine.
Start the engine. Is it assembled properly? You may have to adjust the tension to ensure it engages properly. Always turn the engine off before making any tension adjustments.
A small engine mechanic can complete the repairs. You may have to have it picked up and delivered for repairs to be completed. for more repair related posts, click here.
Save
The Toro Power Max 826 OHAE Snowthrower, Model 37802, has been recalled due to a…
Everyone wants to be independent and not look for help. However there comes a time…
Should seniors buy a snow blower or should they hire a neighbor to clear the…
Many people ask the question, how to prepare my snowblower ready for winter season and…
As Fall and winter approach, it is time to check your snow blower. Doing maintenance…
The Ariens Deluxe 28 254cc Two-Stage Snow Blower is a large 28 inch wide machine…