The basic things you need to address when tuning up your snowblower are as follows:
Spark Plug – Remove it, clean it up and check the gap. Reset the gap if needed. Replace the spark plug if it is not in good shape.
Oil Change – change the oil every year as a minimum, follow the manufacturers instructions and always check the oil before starting the engine.
Belt Condition – make sure that the belts are in good condition, that the tension pulleys are operating properly. Change the belts if they are fraying or cracking.
Tire Condition – Check the tire pressure and add air if needed. Remove the tires and grease the axles. If you ever need to remove them because you have a flat tire, you will be glad you did this.
Grease Auger – there are at least two grease nipples on the auger shaft. Give each one two pumps with your grease gun
Test Operation – Once all of the above are complete, start up the engine and test all functions on your particular snow blower. If anything else needs to be repaired, now is the time to do it.
As long as you have done all of the above and your engine starts easily and runs smoothly you should be good for the season. A rough running engine usually means that the carburetor needs to be cleaned or overhauled. This takes more time and will be the subject of another post.
The Toro Power Max 826 OHAE Snowthrower, Model 37802, has been recalled due to a…
Everyone wants to be independent and not look for help. However there comes a time…
Should seniors buy a snow blower or should they hire a neighbor to clear the…
Many people ask the question, how to prepare my snowblower ready for winter season and…
As Fall and winter approach, it is time to check your snow blower. Doing maintenance…
The Ariens Deluxe 28 254cc Two-Stage Snow Blower is a large 28 inch wide machine…