Why would we talk about snow thrower service now especially when our snow throwers have hardly been used? Well, it turns out there are some very good reasons to do your service on your snow thrower this year.
Here are just a couple of reasons to do it now vs. waiting until next fall when the first snowfall arrives:
With gasoline sitting in your snow thrower’s gas tank and carburetor for a long period of time, the gasoline will deteriorate over time leaving a sticking coating on the engine parts and sometimes clogging the inlets of the carburetor. Left long enough and you will not even be able to start your engine even with a full tank of gasoline. if you have not used your snow thrower since Feb, it could be sitting for 8 to 10 months before it is used again.
At the very least drain the gasoline out of your snow throwers gasoline tank or just run the engine until all of the fuel is used up. This will avoid any chance of the fuel clogging the fuel lines and carburetor. Next season you fill the tank with nice clean and fresh gasoline and you are good to go with your engine. It should start easily once gasoline finds its way into the carburetor.
If you are doing an oil change yourself as part of the snow thrower service, follow the instructions in the service manual that came with your snow thrower. Otherwise, make arrangements for a small engine mechanic to service your throwers engine.
There is lots of debate about when you should change the oil in a small engine. Especially if it is not used often. Some people like to change the oil at the end of each season. While others will change the oil just before the season begins. Also, you may want to change the oil if you are a heavy user of your thrower. As a minimum change the oil once per year. Since all oil degrades over time and engine gasses will accelerate this deterioration.
Even if your oil in your engine looks fresh and clean. Maybe you have only used it a couple of times in the past year, change the oil. If you do it yourself the cost is only a couple of dollars and you are ensuring that your snow thrower’s engine will last for many years.
The last thing you will want to do is to grease all points that require greasing. With fresh grease, you are protecting bearings, etc from exposure to the air and potentially rusting over the summer.
I like to spray the housing of the thrower with a fine oil to cover all parts that could rust. This is usually on the housing that has been scratched or bumped and exposed to the metal. Stopping rust from even starting will also make sure that it lasts a long time.
Even though spring and summer are calling, do this little chore now. Ensure that your snow thrower service is done now to prolong the life of your snow thrower.
The Toro Power Max 826 OHAE Snowthrower, Model 37802, has been recalled due to a…
Everyone wants to be independent and not look for help. However there comes a time…
Should seniors buy a snow blower or should they hire a neighbor to clear the…
Many people ask the question, how to prepare my snowblower ready for winter season and…
As Fall and winter approach, it is time to check your snow blower. Doing maintenance…
The Ariens Deluxe 28 254cc Two-Stage Snow Blower is a large 28 inch wide machine…
View Comments
my snow blower is older as well and all i do is change the oil every year. hope it keeps going , i do not want to buy another one.