The John Deere 1332PE Snow Thrower comes with a 32 inch clearing width, wide enough to handle most large snow clearing jobs on driveways, sidewalks and small parking lots. The 4 cycle engine has 16.50 ft-lbs gross torque power powerful enough to handle even the heaviest snow loads.
This is one of the large snow throwers so it comes with a standard electric start as well as the usual recoil start for back up situations.
Turning is easy with a quick trigger button to lock one wheel while the other turns and you can also turn the chute with the press of a single control as well. As with most snow throwers the transmission is 6 forward and 2 reverse speeds with a friction drive to power the forward and reverse directions. Combined with heated handle grips and a halogen light, this snow thrower should be a pleasure to use in any weather even on the coldest days. Read on for a full list of specifications and features.
Engine: This John Deere 1332PE Snow Thrower has a Powerful 4-cycle OHV Briggs & Stratton Snow Series MAX Engine with 16.50 ft-lbs gross torque power
Transmission: Friction disk drive with 6 forward/2 reverse speeds
Warranty: This John Deere 1332PE Snow Thrower comes with a 2-year consumer warranty, 1-year commercial warranty
Most customers will have to arrange for delivery of their new snow blowers. They are far too big to take home in your car, so you will need a trailer, rent a van or arrange for delivery by the store that you are purchasing the snow blower from. There will be a charge for this service, but it will be the easiest way to arrange for your new snow blower to be delivered to your home. Some stores will rent their vans/trucks to you for a very low price for 2 hours for you to take your purchases home. Lowes and Home Depot do this as well as others.
Accessories
Most snow blowers can be purchased with tire chains to provide extra traction in icy situations. In addition, snow shields are also a good idea if you want to protect yourself from windy conditions and snow being blown back at you from the wind.
A snow blower is a powerful machine and should be treated with safety in mind. Carefully read all of the safety guidelines in the manual prior to operating the machine for the first time and follow these guidelines to ensure that both you and the machine do not have an accident.
Prior to starting your snowblower the first time each day, perform a quick walk around check of the machine to ensure there are no loose parts and no leaking fluids. Check the engine oil to ensure that it is at the correct level as specified by the manual. Top up if necessary. Fill the fuel tank while the engine is cold and prior to using the machine. If you do spill fuel, wait until it has fully evaporated prior to starting the engine. Never spill fuel on a hot engine to avoid fires and always fill the fuel tank outdoors to avoid any possibility of vapors going into your house.
Finally never point the chute in the direction of people, buildings or cars to avoid any possible damage and accidents. Sometimes chunks of ice can be thrown at high speed from the chute and if they hit something, it can cause a lot of damage.
This seems like an obvious thing but people still do it and are hurt, sometimes badly, every year. Always turn it off before you do any maintenance, add fuel, check the oil, fix the chains on the tires, or clear the augers of snow.
Clearing Snow from the Augers – this is were lots of people are hurt every year. Before you try to clear snow that is plugging the augers, shut the engine off to avoid sudden turning of the augers or the impeller which could cause lots of damage to fingers, hands and arms.
This is the really important part. You have plugged the
Sometimes the snow is so compacted, that as you clear it away, it allows the augers to turn as a result of built up tension in the pulley mechanism. Better to have a broom handle stuck in there than your hands!
Most new snow blowers come with a snow clearing tool which you can use for this purpose. Always use this tool and never use your hands. If you have an older machine, an old broom handle will do the trick as well.
Like all snow blowers or snow throwers, maintenance is important for your machine to operate at a peak level for many years. Change the engine oil regularly. Check the belts for tightness. Change the spark plug as required. Grease any spots outlined in the manual. If you need to leave the snow blower outside all year round, cover the machine with a proper cover to keep it looking new and avoid deterioration of the tires and metal components.
The Toro Power Max 826 OHAE Snowthrower, Model 37802, has been recalled due to a…
Everyone wants to be independent and not look for help. However there comes a time…
Should seniors buy a snow blower or should they hire a neighbor to clear the…
Many people ask the question, how to prepare my snowblower ready for winter season and…
As Fall and winter approach, it is time to check your snow blower. Doing maintenance…
The Ariens Deluxe 28 254cc Two-Stage Snow Blower is a large 28 inch wide machine…
View Comments