Each year when you’re doing your annual maintenance, the shear pins should be inspected to ensure that they are not broken or missing. When they do break in most cases they will fall out on their own.
If you do need to install new shear pins always use the exact replacement pins that are recommended. Your manual will provide information on the kind of shear pin that you should be used. Also make sure that the engine is turned off . Make sure that there is no danger of the auger turning while you are replacing the shear pin.
It is always a good idea to have an extra set of shear pins on hand for use in replacement in the winter season. This will avoid getting stuck in the middle of a snowstorm. Or not having a replacement, or being able to purchase one when the stores are closed. Personally,I would rather have a couple of extra sets of shear pins than have to shovel snow.
The Toro Power Max 826 OHAE Snowthrower, Model 37802, has been recalled due to a…
Everyone wants to be independent and not look for help. However there comes a time…
Should seniors buy a snow blower or should they hire a neighbor to clear the…
Many people ask the question, how to prepare my snowblower ready for winter season and…
As Fall and winter approach, it is time to check your snow blower. Doing maintenance…
The Ariens Deluxe 28 254cc Two-Stage Snow Blower is a large 28 inch wide machine…